《塑料》第 55 卷第 5 期目录（2026 年）
专题：储氢气瓶内胆复合材料
[1] 袁浩，宾光富，潘阳，等.塑料内胆碳纤维全缠绕气瓶设计与爆破实验 [J]. 塑料，2026,55 (5):1-8.
[1] YUAN Hao, BIN Guangfu, PAN Yang, et al. Design and Bursting Test of Plastic Liner Carbon Fiber Fully Wound Cylinders [J]. Plastics, 2026, 55 (5):1-8.
[2] 李世龙，李介普，刘旭，等.Ⅳ型储氢气瓶内胆孔洞形成的数值模拟 [J]. 塑料，2026,55 (5):9-15.
[2] LI Shilong, LI Jiepu, LIU Xu, et al. Numerical Simulation of Cavity Formation in Liners of Type IV Hydrogen Storage Vessels [J]. Plastics, 2026, 55 (5):9-15.
改性与合金
[3] 王富龙，钟安澜，钟颜阳，等.散光剂粒径对聚乙烯散光复合薄膜性能的影响及机理 [J]. 塑料，2026,55 (5):16-20.
[3] WANG Fulong, ZHONG Anlan, ZHONG Yanyang, et al. Effect and Mechanism of Light Diffusing Particle Size on Properties of Polyethylene-Based Light-Diffusing Composite Film [J]. Plastics, 2026, 55 (5):16-20.
[4] 杨陈，林燕萍，张真真，等.改性纳米SiO?/WPU膜的制备与性能 [J]. 塑料，2026,55 (5):21-24.
[4] YANG Chen, LIN Yanping, ZHANG Zhenzhen, et al. Preparation and Properties of Modified Nano-SiO?/WPU Films [J]. Plastics, 2026, 55 (5):21-24.
[5] 倪栋.透明ABS树脂性能的优化及其有机硅涂层改善其表面耐磨性 [J]. 塑料，2026,55 (5):25-30.
[5] NI Dong. Property Optimization of Transparent ABS Resin and Surface Wear Resistance Improvement via Silicone Coating [J]. Plastics, 2026, 55 (5):25-30.
[6] 樊东焱，刘晓阳，李旭，等.棉杆/环氧树脂复合材料的制备与改性 [J]. 塑料，2026,55 (5):31-36.
[6] FAN Dongyan, LIU Xiaoyang, LI Xu, et al. Preparation and Modification of Cotton Stalk/Epoxy Resin Composites [J]. Plastics, 2026, 55 (5):31-36.
[7] 曾玉，唐鹿.纳米洋葱碳/石墨烯/硅橡胶复合材料的介电和力学性能 [J]. 塑料，2026,55 (5):37-43.
[7] ZENG Yu, TANG Lu. Dielectric and Mechanical Properties of Onion-Like Carbons/Graphene/Methyl Vinyl Silicone Rubber Composites [J]. Plastics, 2026, 55 (5):37-43.
[8] 佘英飞.银负载硫酸钙晶须/水性聚氨酯复合材料的制备与性能 [J]. 塑料，2026,55 (5):44-49.
[8] SHE Yingfei. Preparation and Properties of Silver-Loaded Calcium Sulfate Whisker/Waterborne Polyurethane Composites [J]. Plastics, 2026, 55 (5):44-49.
[9] 寇竟邦，邓玉明，宋利君，等.生物可降解聚乳酸基酸奶杯的制备及对酸奶保鲜效果 [J]. 塑料，2026,55 (5):50-57.
[9] KOU Jingbang, DENG Yuming, SONG Lijun, et al. Preparation of Fully Biodegradable Poly(Lactic Acid)-Based Yogurt Cups and the Effect on Yogurt Preservation [J]. Plastics, 2026, 55 (5):50-57.
计算机辅助设计与数据库
[10] 肖凯，李少英.同向双螺杆螺棱弧长对聚丙烯挤出过程的影响 [J]. 塑料，2026,55 (5):58-64.
[10] XIAO Kai, LI Shaoying. Effect of Co-Rotating Twin-Screw Flight Arc Length on Polypropylene Extrusion Process [J]. Plastics, 2026, 55 (5):58-64.
[11] 王芳.基于CAE分析的汽车灯罩模具与复合顶出机构创新设计 [J]. 塑料，2026,55 (5):65-71.
[11] WANG Fang. CAE-Based Innovative Design of Automotive Lamp Housing Mold and Combined Ejection Mechanism [J]. Plastics, 2026, 55 (5):65-71.
[12] 卢高科，徐冰，张亚军，等.基于有限元的PBX代料压制工艺分析 [J]. 塑料，2026,55 (5):72-79.
[12] LU Gaoke, XU Bing, ZHANG Yajun, et al. Finite Element-Based Process Analysis of PBX Substitute Material Pressing [J]. Plastics, 2026, 55 (5):72-79.
[13] 祝康，廖秋慧，施晓浩，等.EPB电机双联齿轮多目标注塑工艺优化 [J]. 塑料，2026,55 (5):80-85.
[13] ZHU Kang, LIAO Qiuhui, SHI Xiaohao, et al. Multi-Objective Optimization of Injection Molding Process for EPB Motor Double-Gear [J]. Plastics, 2026, 55 (5):80-85.
[14] 康昊源，陈良超，吕冠军.PVC塑料衬里缺陷超声检测有效性及力学分析 [J]. 塑料，2026,55 (5):86-93.
[14] KANG Haoyuan, CHEN Liangchao, LYU Guanjun. Ultrasonic Testing Effectiveness and Mechanical Analysis for PVC Lining Defects [J]. Plastics, 2026, 55 (5):86-93.
[15] 罗华云，邹金红，李茏涛.基于熵权-TOPSIS的双色注塑工艺优化与模具设计 [J]. 塑料，2026,55 (5):94-101.
[15] LUO Huayun, ZOU Jinhong, LI Longtao. Process Optimization and Mold Design for Two-Color Injection Molding Based on Entropy Weight Method and TOPSIS [J]. Plastics, 2026, 55 (5):94-101.
[16] 李海丰，马颜斌，孙锐，等.商用车真空筒注塑成型模拟及模具设计 [J]. 塑料，2026,55 (5):102-108.
[16] LI Haifeng, MA Yanbin, SUN Rui, et al. Simulation and Mold Design of Injection Molding for Commercial Vehicle Vacuum Canister [J]. Plastics, 2026, 55 (5):102-108.
[17] 朱曦宇，檀学莹，房振峰，等.电磁阀液压检测系统中密封圈的密封性能 [J]. 塑料，2026,55 (5):109-114.
[17] ZHU Xiyu, TAN Xueying, FANG Zhenfeng, et al. Sealing Performance of Sealing Ring in Hydraulic Testing System of Solenoid Valve [J]. Plastics, 2026, 55 (5):109-114.
[18] 胡砚磊.基于改良Eyring模型的聚丙烯树脂高速拉伸性能 [J]. 塑料，2026,55 (5):115-120.
[18] HU Yanlei. High-Speed Tensile Properties of Polypropylene Resin Based on a Modified Eyring Model [J]. Plastics, 2026, 55 (5):115-120.
标准与测试
[19] 马振祺，朱亮，陈明龙，等.不同频率下水树区域的非线性损伤机理 [J]. 塑料，2026,55 (5):121-126.
[19] MA Zhenqi, ZHU Liang, CHEN Minglong, et al. Nonlinear Damage Mechanisms in Water-Tree Regions at Different Frequencies [J]. Plastics, 2026, 55 (5):121-126.
[20] 鲁珍妮，李函珂，李烃，等.不同接触条件下塑料餐盒微塑料释放表征 [J]. 塑料，2026,55 (5):127-135.
[20] LU Zhenni, LI Hanke, LI Ting, et al. Characterization of Microplastic Release from Plastic Food Boxes Under Different Contact Conditions [J]. Plastics, 2026, 55 (5):127-135.
[21] 程洪，黄诗旖，夏巽鹏，等.形态定量分析在塑料和微塑料污染物分类中的应用 [J]. 塑料，2026,55 (5):136-142.
[21] CHENG Hong, HUANG Shiyi, XIA Xunpeng, et al. Application of Morphological Quantitative Analysis in the Classification of Plastic and Microplastic Pollutants [J]. Plastics, 2026, 55 (5):136-142.
[22] 范若寻，吴华杰，方学良，等.聚醚醚酮薄壁方管结构的弯曲性能 [J]. 塑料，2026,55 (5):143-147.
[22] FAN Ruoxun, WU Huajie, FANG Xueliang, et al. Flexural Properties of Polyetheretherketone Thin-Walled Square Tubular Structures [J]. Plastics, 2026, 55 (5):143-147.
机头与模具
[23] 龙吉业，马新波，张浩成.汽车助力油罐外壳哈夫与内缩滑块注塑模设计 [J]. 塑料，2026,55 (5):148-154.
[23] LONG Jiye, MA Xinbo, ZHANG Haocheng. Design of Injection Mold with Half Slider and Shrinking Slider for an Automotive Fuel Tank Shell [J]. Plastics, 2026, 55 (5):148-154.
[24] 赵砚科，张力军.钢琴琴键支撑件热固性成型模具设计 [J]. 塑料，2026,55 (5):155-160.
[24] ZHAO Yanke, ZHANG Lijun. Optimized Design of a Thermosetting Mold for Piano Key Support Components [J]. Plastics, 2026, 55 (5):155-160.
成型加工与理论
[25] 张洁，庞永莉，胡兵，等.油气集输用增强热塑性塑料管气体渗透 [J]. 塑料，2026,55 (5):161-166.
[25] ZHANG Jie, PANG Yongli, HU Bing, et al. Gas Permeation of Enhanced Thermoplastic Pipes for Oil and Gas Gathering and Transportation [J]. Plastics, 2026, 55 (5):161-166.
[26] 李海鹏，彭锦星，刘芳，等.塑料燃烧特性及动力学分析 [J]. 塑料，2026,55 (5):167-171.
[26] LI Haipeng, PENG Jinxing, LIU Fang, et al. Combustion Characteristics and Kinetic Analysis of Plastics [J]. Plastics, 2026, 55 (5):167-171.
[27] 程亚维，刘红艳，李红婵.基于机器学习方法预测3D打印部件的力学性能 [J]. 塑料，2026,55 (5):172-178.
[27] CHENG Yawei, LIU Hongyan, LI Hongchan. Predicting the Mechanical Properties of 3D Printed Components Based on Machine Learning Methods [J]. Plastics, 2026, 55 (5):172-178.
发展与动态
[28] 郑梅芝，董兴广，杨金玲.聚对苯二甲酸乙二醇酯抗菌改性的进展与应用 [J]. 塑料，2026,55 (5):179-184.
[28] ZHENG Meizhi, DONG Xingguang, YANG Jinling. Progress and Application in Antimicrobial Modification of Polyethylene Terephthalate [J]. Plastics, 2026, 55 (5):179-184.
[29] 臧丽娟，钟安澜，曾舒，等.基于改性SiO?的聚烯烃薄膜功能强化技术 [J]. 塑料，2026,55 (5):185-189.
[29] ZANG Liujuan, ZHONG Anlan, ZENG Shu, et al. Functional Enhancement Technology of Polyolefin Films Based on Modified SiO? [J]. Plastics, 2026, 55 (5):185-189.
[30] 陈荣源，尹绍雨，张福鹏，等.聚乳酸增韧改性的进展 [J]. 塑料，2026,55 (5):190-195.
[30] CHEN Rongyuan, YIN Shaoyu, ZHANG Fupeng, et al. Progress in Toughening Modification of Polylactic Acid [J]. Plastics, 2026, 55 (5):190-195.
[31] 张文武，何继敏，郑津烁，等.连续纤维增强热塑性复合材料二次成型方法与展望 [J]. 塑料，2026,55 (5):196-201.
[31] ZHANG Wenwu, HE Jimin, ZHENG Jinshuo, et al. Methods and Prospects of Secondary Forming of Continuous Fiber Reinforced Thermoplastic Composites [J]. Plastics, 2026, 55 (5):196-201.
合成与制备
[32] 丁长坤，梁兵，龙佳朋.磺酰胺类受阻酚抗氧剂的合成及性能 [J]. 塑料，2026,55 (5):202-208.
[32] DING Changkun, LIANG Bing, LONG Jiapeng. Synthesis and Properties of Hindered Phenol Antioxidants with Sulfonamide Groups [J]. Plastics, 2026, 55 (5):202-208.
[33] 张宁，江红，邵文静.聚氨酯阻燃剂的制备及对服用织物的涂层应用 [J]. 塑料，2026,55 (5):209-213.
[33] ZHANG Ning, JIANG Hong, SHAO Wenjing. Preparation of Phosphorus Silicon Co-Modified Waterborne Polyurethane and the Coated Polyester Fabrics [J]. Plastics, 2026, 55 (5):209-213.
[34] 史雯豪，郭雅妮，庾莎莎，等.花生壳纤维素-腐植酸基吸水树脂的制备及性能 [J]. 塑料，2026,55 (5):214-219.
[34] SHI Wenhao, GUO Yani, YU Shasha, et al. Preparation and Properties of Peanut Shell Cellulose-Humic Acid-Based Superabsorbent Resin [J]. Plastics, 2026, 55 (5):214-219.
