[1] 孙成霖，王琦，孙凯，等.无卤阻燃复合陶瓷化聚烯烃材料的阻燃与耐火性能 [J]. 塑料，2026,55 (4):1-7.

[1] SUN Chenglin, WANG Qi, SUN Kai, et al. Flame Retardancy and Fire Resistance of Halogen?Free Ceramifiable Polyolefin Composite Materials [J]. Plastics, 2026, 55 (4):1?7.

 

[2] 卿剑波，王鹏达，代振威，等.不同内腔壁涡流式静态混合器的混合特性 [J]. 塑料，2026,55 (4):8?13.

[2] QING Jianbo, WANG Pengda, DAI Zhenwei, et al. Mixing Characteristics of Vortex Static Mixers with Different Inner Cavity Wall Configurations [J]. Plastics, 2026, 55 (4):8?13.

 

[3] 李玲选，崔建平.基于深度神经网络和灰色关联度法分析的 3D 打印零件力学性能 [J]. 塑料，2026,55 (4):14?19.

[3] LI Lingxuan, CUI Jianping. Mechanical Properties Analysis of 3D?Printed Parts Based on Deep Neural Network and Grey Relational Analysis [J]. Plastics, 2026, 55 (4):14?19.

 

[4] 唐妍，孙志峻.基于机器学习方法预测碳纤维增强尼龙零件的力学性能 [J]. 塑料，2026,55 (4):20?27.

[4] TANG Yan, SUN Zhijun. Prediction of Mechanical Properties of Carbon Fiber Reinforced Nylon Parts Based on Machine Learning Method [J]. Plastics, 2026, 55 (4):20?27.

 

[5] 程启森，苏瑞霞，汤正成.基于螺旋随形的玻纤增强塑料冷却设计分析 [J]. 塑料，2026,55 (4):28?33.

[5] CHENG Qisen, SU Ruixia, TANG Zhengcheng. Cooling Design Analysis of Glass Fiber Reinforced Plastics Based on Spiral Conformal Structure [J]. Plastics, 2026, 55 (4):28?33.

 

[6] 苗乃明，施栋帆，朱雪茹.手电钻外壳注塑模具的设计 [J]. 塑料，2026,55 (4):34?39.

[6] MIAO Naiming, SHI Dongfan, ZHU Xueru. Design of Injection Mold for Electric Hand Drill Shell [J]. Plastics, 2026, 55 (4):34?39.

 

[7] 苏瞧忠.定模带双齿斜顶结构的大型注塑件模具设计 [J]. 塑料，2026,55 (4):40?45.

[7] SU Qiaozhong. Mold Design for Large Injection?Molded Parts with Double?Rack Lifter Structure on Fixed Mold [J]. Plastics, 2026, 55 (4):40?45.

 

[8] 蔡厚道，周启兴，王腊节,等.水平电泳仪上下灯盖的注塑模具设计 [J]. 塑料，2026,55 (4):46?51.

[8] CAI Houdao, ZHOU Qixing, WANG Lajie, et al. Design of Injection Mold for Upper and Lower Lamp Covers of Horizontal Electrophoresis Apparatus [J]. Plastics, 2026, 55 (4):46?51.

 

[9] 肖国华.某异形瓶盖蜗杆脱螺纹机构五板式点浇口注塑模设计 [J]. 塑料，2026,55 (4):52?58.

[9] XIAO Guohua. Design of Five?Plate Point?Gate Injection Mold with Worm Thread?Removing Mechanism for Special?Shaped Bottle Cap [J]. Plastics, 2026, 55 (4):52?58.

 

[10] 熊毅，刘明洋.汽车电瓶上盖子母滑块抽芯的注射模设计 [J]. 塑料，2026,55 (4):59?63.

[10] XIONG Yi, LIU Mingyang. Injection Mold Design with Primary?Secondary Slider Core?Pulling for Automobile Battery Upper Cover [J]. Plastics, 2026, 55 (4):59?63.

 

[11] 李怀秀，李星星，蒋立正，等.汽车水箱下支座下坡斜顶热流道的模具设计 [J]. 塑料，2026,55 (4):64?69.

[11] LI Huaixiu, LI Xingxing, JIANG Lizheng, et al. Hot?Runner Mold Design with Downhill?Type Lifter for Automobile Water Tank Lower Support [J]. Plastics, 2026, 55 (4):64?69.

 

[12] 孟海程，李响，周道鹏，等.耐热阻燃聚乳酸复合材料的制备及性能 [J]. 塑料，2026,55 (4):70?75.

[12] MENG Haicheng, LI Xiang, ZHOU Daopeng, et al. Preparation and Properties of Heat?Resistant and Flame?Retardant Polylactic Acid Composite Materials [J]. Plastics, 2026, 55 (4):70?75.

 

[13] 邓正良，闵样，张永航，等.新型 N/S/P 膨胀型阻燃剂在环氧树脂阻燃改性中的应用 [J]. 塑料，2026,55 (4):76?81.

[13] DENG Zhengliang, MIN Yang, ZHANG Yonghang, et al. Application of Novel N/S/P Intumescent Flame Retardant in Flame?Retardant Modification of Epoxy Resin [J]. Plastics, 2026, 55 (4):76?81.

 

[14] 田清泉，闫杰，胡明.壳聚糖 / PVA / 纳米金刚石复合膜的制备及性能 [J]. 塑料，2026,55 (4):82?87.

[14] TIAN Qingquan, YAN Jie, HU Ming. Preparation and Properties of Chitosan/PVA/Nanodiamond Composite Films [J]. Plastics, 2026, 55 (4):82?87.

 

[15] 马明子，王偌婷，王琳.不同分散剂对聚苯乙烯微塑料分散性能的影响 [J]. 塑料，2026,55 (4):88?92.

[15] MA Mingzi, WANG Ruoting, WANG Lin. Effect of Different Dispersants on Dispersion Properties of Polystyrene Microplastics [J]. Plastics, 2026, 55 (4):88?92.

 

[16] 张晓茜，孙一鸣，黄程尧，等.聚磷酸铵 / 三聚氰胺 / 海藻酸钠膨胀阻燃环氧树脂 [J]. 塑料，2026,55 (4):93?97.

[16] ZHANG Xiaoqian, SUN Yiming, HUANG Chengyao, et al. Intumescent Flame?Retardant Epoxy Resin Modified by Ammonium Polyphosphate/Melamine/Sodium Alginate [J]. Plastics, 2026, 55 (4):93?97.

 

[17] 姜欣，李占江，张舒琪，等.阻燃聚酰胺 56 复合材料的非等温结晶行为 [J]. 塑料，2026,55 (4):98?103.

[17] JIANG Xin, LI Zhanjiang, ZHANG Shuqi, et al. Non?Isothermal Crystallization Behavior of Flame?Retardant Polyamide 56 Composites [J]. Plastics, 2026, 55 (4):98?103.

 

[18] 刘宇帆，蒋怀，肖瑶，等.对苯二甲酸二环戊基二酰肼改性聚丙烯的性能及成核机理 [J]. 塑料，2026,55 (4):104?108.

[18] LIU Yufan, JIANG Huai, XIAO Yao, et al. Properties and Nucleation Mechanism of Polypropylene Modified by Dicyclopentyl Terephthalic Dihydrazide [J]. Plastics, 2026, 55 (4):104?108.

 

[19] 范津铭，魏兴雨，贾国元，等.纳米 SiO?的表面处理及其对环氧树脂的改性 [J]. 塑料，2026,55 (4):109?114.

[19] FAN Jinming, WEI Xingyu, JIA Guoyuan, et al. Surface Treatment of Nano?SiO? and Its Modification for Epoxy Resin [J]. Plastics, 2026, 55 (4):109?114.

 

[20] 胡斌，商岸帆，任建洲，等.废旧 HDPE / 废胶粉复合改性沥青的制备与性能 [J]. 塑料，2026,55 (4):115?122.

[20] HU Bin, SHANG Anfan, REN Jianzhou, et al. Preparation and Properties of Waste HDPE/Waste Rubber Powder Composite Modified Asphalt [J]. Plastics, 2026, 55 (4):115?122.

 

[21] 周文志，王芳莲，王芬芬.石墨烯 / 聚丙烯复合材料的制备及性能 [J]. 塑料，2026,55 (4):123?127.

[21] ZHOU Wenzhi, WANG Fanglian, WANG Fenfen. Preparation and Properties of Graphene/Polypropylene Composites [J]. Plastics, 2026, 55 (4):123?127.

 

[22] 鲁瑞瑶，闫婧瑶，张若雨，等.不同分子量 POE 对聚丙烯树脂增韧的影响 [J]. 塑料，2026,55 (4):128?133.

[22] LU Ruiyao, YAN Jingyao, ZHANG Ruoyu, et al. Effect of POE with Different Molecular Weights on Toughening of Polypropylene Resin [J]. Plastics, 2026, 55 (4):128?133.

 

[23] 白静，李爽，柯志娟，等.CPEGDA 含量对 LCB?PLA/CPECDA 共混物性能的影响 [J]. 塑料，2026,55 (4):134?138.

[23] BAI Jing, LI Shuang, KE Zhijuan, et al. Effect of CPEGDA Content on Properties of LCB?PLA/CPECDA Blends [J]. Plastics, 2026, 55 (4):134?138.

 

[24] 陈慧.WPU/MXene 对服用棉织物的电磁防护涂层 [J]. 塑料，2026,55 (4):139?142.

[24] CHEN Hui. Electromagnetic Protective Coating of WPU/MXene for Wearing Cotton Fabrics [J]. Plastics, 2026, 55 (4):139?142.

 

[25] 曹洁，云雪艳，寇竟邦，等.聚乳酸基共混吹塑薄膜的制备及其力学性能和透过性能 [J]. 塑料，2026,55 (4):143?149.

[25] CAO Jie, YUN Xueyan, KOU Jingbang, et al. Preparation, Mechanical and Permeability Properties of PLA?Based Blown Blend Films [J]. Plastics, 2026, 55 (4):143?149.

 

[26] 袁振，吕欣蕊，孙振，等.汽车领域用碳纤维复合材料的制备及性能 [J]. 塑料，2026,55 (4):150?154.

[26] YUAN Zhen, LYU Xinrui, SUN Zhen, et al. Preparation and Properties of Carbon Fiber Composites for Automobile Field [J]. Plastics, 2026, 55 (4):150?154.

 

[27] 樊东焱，马扶宸，刘晓阳，等.具有核壳结构的煤矸石支撑剂的制备与性能 [J]. 塑料，2026,55 (4):155?160.

[27] FAN Dongyan, MA Fuchen, LIU Xiaoyang, et al. Preparation and Properties of Coal Gangue Proppant with Core?Shell Structure [J]. Plastics, 2026, 55 (4):155?160.

 

[28] 李凯茵，陈明清，施冬健.含有双重动态键的高强度环氧树脂的制备及再加工性能 [J]. 塑料，2026,55 (4):161?166.

[28] LI Kaiyin, CHEN Mingqing, SHI Dongjian. Preparation and Reprocessing Properties of High?Strength Epoxy Resin Containing Dual Dynamic Bonds [J]. Plastics, 2026, 55 (4):161?166.

 

[29] 李修文，吴嘉栋，相利学，等.碳泡沫导热复合材料进展综述 [J]. 塑料，2026,55 (4):167?172.

[29] LI Xiuwen, WU Jiadong, XIANG Lixue, et al. Review on Progress of Carbon Foam Thermal Conductive Composites [J]. Plastics, 2026, 55 (4):167?172.

 

[30] 邱剑锷，何振培，周建英，等.聚四氟乙烯中空纤维膜表面改性及分离性能的进展 [J]. 塑料，2026,55 (4):173?178.

[30] QIU Jian’e, HE Zhenpei, ZHOU Jianying, et al. Progress on Surface Modification and Separation Performance of PTFE Hollow Fiber Membranes [J]. Plastics, 2026, 55 (4):173?178.

 

[31] 刘俊逸，朱云龙，杨慧，等.水中微塑料污染的来源、危害、检测及处理 [J]. 塑料，2026,55 (4):179?185.

[31] LIU Junyi, ZHU Yunlong, YANG Hui, et al. Sources, Hazards, Detection and Treatment of Microplastic Pollution in Water [J]. Plastics, 2026, 55 (4):179?185.

 

[32] 李贝，贾宝玲，丁睿，等.真空微模具法制备透明质酸微针工艺 [J]. 塑料，2026,55 (4):186?193.

[32] LI Bei, JIA Baoling, DING Rui, et al. Preparation Technology of Hyaluronic Acid Microneedles by Vacuum Micro?Molding Method [J]. Plastics, 2026, 55 (4):186?193.

 

[33] 王笛，吴恒，刘文耀.面向高温工况的 PEEK 基多孔复合材料制备工艺及摩擦学性能 [J]. 塑料，2026,55 (4):194?200.

[33] WANG Di, WU Heng, LIU Wenyao. Preparation Technology and Tribological Properties of PEEK?Based Porous Composites for High?Temperature Working Conditions [J]. Plastics, 2026, 55 (4):194?200.

 

[34] 左宇仓，徐睿杰，雷彩红.热拉伸对聚偏氟乙烯微孔膜结构和性能的影响 [J]. 塑料，2026,55 (4):201?205.

[34] ZUO Yucang, XU Ruijie, LEI Caihong. Effect of Hot?Stretching on Structure and Properties of PVDF Microporous Membrane [J]. Plastics, 2026, 55 (4):201?205.

 

[35] 朱丽飞，李娜，黄森彪，等.注塑条件对共聚酯力学性能的影响 [J]. 塑料，2026,55 (4):206?209.

[35] ZHU Lifei, LI Na, HUANG Senbiao, et al. Effect of Injection Molding Conditions on Mechanical Properties of Copolyester [J]. Plastics, 2026, 55 (4):206?209.

 

[36] 颜申之，隋鑫怿，罗浩，等.PBAT/PLA 生物降解复合材料的增容与性能 [J]. 塑料，2026,55 (4):210?215.

[36] YAN Shenzhi, SUI Xinyi, LUO Hao, et al. Compatibilization and Properties of PBAT/PLA Biodegradable Composites [J]. Plastics, 2026, 55 (4):210?215.

 

[37] 黄坚强，肖湘莲，刘云馨，等.CaCO?填充 PBAT/PBS/PLA 共混材料的制备与性能 [J]. 塑料，2026,55 (4):216?221.

[37] HUANG Jianqiang, XIAO Xianglian, LIU Yunxin, et al. Preparation and Properties of CaCO??Filled PBAT/PBS/PLA Blends [J]. Plastics, 2026, 55 (4):216?221.