[1]卢元昊，宋力，苏婷婷，等.聚己二酸-辛二酸丁二醇酯的酶促降解性能[J].塑料，2026,55 (3):1-6.

[1]LU Yuanhao, SONG Li, SU Tingting, et al. Enzymatic Degradation Properties of Poly(Butylene Adipate-co-Butylene Suberate)[J].Plastics,2026,55 (3):1-6.

[2]廖师琴，王清清.聚乳酸纤维的制备流程及其在生物医疗领域的发展现状[J].塑料，2026,55 (3):7-11.

[2]LIAO Shiqin, WANG Qingqing. Preparation Process of Polylactic Acid Fibers and the Current Development Status in the Biomedical Field[J].Plastics,2026,55 (3):7-11.

[3]热孜亚?尼亚孜，张雯.PVA与改性木质素共混复合膜的制备与性能[J].塑料，2026,55 (3):12-18.

[3]REZIYA Niyazi, ZHANG Wen. Preparation and Properties of PVA/Modified Lignin Composite Films[J].Plastics,2026,55 (3):12-18.

[4]卫丹，唐静，韩小娟，等.木质素增强聚合物复合材料的进展[J].塑料，2026,55 (3):19-23.

[4]WEI Dan, TANG Jing, HAN Xiaojuan, et al. Recent Advances in Lignin-Reinforced Polymer Composites[J].Plastics,2026,55 (3):19-23.

[5]王李萌，苏永生，熊俊，等.FDM-3D 打印工艺参数下的力学性能进展[J].塑料，2026,55 (3):24-30.

[5]WANG Limeng, SU Yongsheng, XIONG Jun, et al. Progress of Mechanical Properties Under FDM-3D Printing Process Parameters[J].Plastics,2026,55 (3):24-30.

[6]李佳仁，辜祖珣，毛海军，等.微开模发泡注塑成型参数影响规律现状及进展[J].塑料，2026,55 (3):31-36.

[6]LI Jiaren, GU Zuxun, MAO Haijun, et al. Current Status and Progress of Effect of Mold-Opening Microcellular Injection Molding Parameters[J].Plastics,2026,55 (3):31-36.

[7]张永春，孟晓佳.碳纳米管增强碳纤维/环氧树脂复合材料力学性能的进展[J].塑料，2026,55 (3):37-41.

[7]ZHANG Yongchun, MENG Xiaojia. Progress on Mechanical Properties of Carbon Nanotube Reinforced Carbon Fiber/Epoxy Composites[J].Plastics,2026,55 (3):37-41.

[8]范岚煜，郑晓虹，胡贵宝，等.纤维增强树脂复合材料RTM工艺的进展[J].塑料，2026,55 (3):42-45.

[8]FAN Lanyu, ZHENG Xiaohong, HU Guibao, et al. Progress in Resin Transfer Molding (RTM) Process of Fiber-Reinforced Resin Composite[J].Plastics,2026,55 (3):42-45.

[9]孙见卓，陈培忠，王克俭.连续碳纤维增强热塑性复合材料回收技术及航空工业中再利用的进展[J].塑料，2026,55 (3):46-50.

[9]SUN Jianzhuo, CHEN Peizhong, WANG Kejian. Research Status of Recycling Technology for Continuous Carbon Fiber Reinforced Thermoplastic Composites and Reusing Progress in Aviation Industry[J].Plastics,2026,55 (3):46-50.

[10]王鹏飞，刘少岗，张宪超，等.基于 3D 打印对多层结构聚合物形状恢复性能的影响[J].塑料，2026,55 (3):51-54.

[10]WANG Pengfei, LIU Shaogang, ZHANG Xianchao, et al. Impact of 3D Printing on the Shape Recovery Performance of Multilayer Polymer Structures[J].Plastics,2026,55 (3):51-54.

[11]王筱媛，王竹，韩向艳，等.高透明抗冲聚丙烯的结构与性能[J].塑料，2026,55 (3):55-58.

[11]WANG Xiaoyuan, WANG Zhu, HAN Xiangyan, et al. Structure and Properties of Highly Transparent Impact-Resistant Polypropylene[J].Plastics,2026,55 (3):55-58.

[12]汪莹，李敏，李桃山，等.纤维织物增强环氧树脂基复合材料拉伸疲劳特性[J].塑料，2026,55 (3):59-65.

[12]WANG Ying, LI Min, LI Taoshan, et al. Tensile Fatigue Behavior of Fiber Fabric Reinforced Epoxy Composites[J].Plastics,2026,55 (3):59-65.

[13]望秀丽，全王榫，林莉，等.食品接触用塑料中 3 种光稳定剂迁移量的测定[J].塑料，2026,55 (3):66-70.

[13]WANG Xiuli, QUAN Wangsun, LIN Li, et al. Determination of Migration of Three Light Stabilizers from Plastic Food Contact Plastics[J].Plastics,2026,55 (3):66-70.

[14]徐广琦，石艳，陈强，等.聚氯乙烯悬浮聚合颗粒的特性[J].塑料，2026,55 (3):71-76.

[14]XU Guangqi, SHI Yan, CHEN Qiang, et al. Particle Characteristics of Polyvinyl Chloride by Suspension Polymerization[J].Plastics,2026,55 (3):71-76.

[15]刘杰，胡辰，吴华杰，等.聚醚醚酮基础试样在不同载荷下的力学行为模拟[J].塑料，2026,55 (3):77-83.

[15]LIU Jie, HU Chen, WU Huajie, et al. Simulation of Mechanical Behavior of Basic Polyetheretherketone Specimens Under Different Load[J].Plastics,2026,55 (3):77-83.

[16]曲英杰，王新超，魏嘉豪，等.基于 3D 打印的注塑模具仿真与工艺参数优化[J].塑料，2026,55 (3):84-93.

[16]QU Yingjie, WANG Xinchao, WEI Jiahao, et al. Simulation and Process Parameter Optimization of 3D-Printed Injection Molds[J].Plastics,2026,55 (3):84-93.

[17]陈佩，陆晓峰，朱晓磊.EVA 管式反应器反应过程 CFD 仿真分析[J].塑料，2026,55 (3):94-100.

[17]CHEN Pei, LU Xiaofeng, ZHU Xiaolei. CFD Simulation of EVA Tubular Reactor Polymerization Process[J].Plastics,2026,55 (3):94-100.

[18]曾浪，宁林，唐艺，等.填充方案对 FDM 打印热变形与力学行为的影响[J].塑料，2026,55 (3):101-106.

[18]ZENG Lang, NING Lin, TANG Yi, et al. Influence of Infill Strategy on Thermal Deformation and Mechanical Behavior of FDM-Printed Parts[J].Plastics,2026,55 (3):101-106.

[19]王心悦，刘少岗，邱丹丹，等.4D 打印工艺参数对 PLA/CF 复合材料形状记忆性能的影响[J].塑料，2026,55 (3):107-111.

[19]WANG Xinyue, LIU Shaogang, QIU Dandan, et al. Effect of 4D Printing Process Parameters on the Shape Memory Performance of PLA/CF Composites[J].Plastics,2026,55 (3):107-111.

[20]周刚，侯震，张亚军，等.工艺参数对微结构注塑制品光学性能的影响[J].塑料，2026,55 (3):112-115.

[20]ZHOU Gang, HOU Zhen, ZHANG Yajun, et al. Effect of Process Parameters on the Optical Properties of Microstructured Injection-Molded Parts[J].Plastics,2026,55 (3):112-115.

[21]朱广凯，赵旭波，朱勇，等.不同形貌碳酸钙改性及其对可降解塑料PBAT性能的影响[J].塑料，2026,55 (3):116-123.

[21]ZHU Guangkai, ZHAO Xubo, ZHU Yong, et al. Modification of Calcium Carbonate of Different Morphologies and the Effects on Properties of Biodegradable Plastics PBAT[J].Plastics,2026,55 (3):116-123.

[22]陈小蝶，陈章成，金振辉，等.红磷/APP 协效阻燃聚乙烯复合材料的制备[J].塑料，2026,55 (3):124-128.

[22]CHEN Xiaodie, CHEN Zhangcheng, JIN Zhenhui, et al. Preparation of Red Phosphorus/APP Synergistically Flame-Retarded Polyethylene Composites[J].Plastics,2026,55 (3):124-128.

[23]沈锐其，江凯乐，桂豪冠，等.凹凸棒石原位强化 PET 的制备及性能[J].塑料，2026,55 (3):129-135.

[23]SHEN Ruiqi, JIANG Kaile, GUI Haoguan, et al. Preparation and Properties of PET In-Situ Strengthened by Atapulgite[J].Plastics,2026,55 (3):129-135.

[24]湛贞.乙烯-丁烯弹性体对聚丙烯哑光膜性能的影响[J].塑料，2026,55 (3):136-141.

[24]ZHAN Zhen. Influence of Ethylene-Butene Elastomer on Properties of Polypropylene Matte Films[J].Plastics,2026,55 (3):136-141.

[25]陈慧.基于 NGO/WPU 的服用棉织物防辐射涂层[J].塑料，2026,55 (3):142-145.

[25]CHEN Hui. NGO/WPU-Based Anti-Radiation Coating for Wearable Cotton Fabrics[J].Plastics,2026,55 (3):142-145.

[26]王秀蝶，嵇相阳，王旭，等.超支化酰胺增容剂对 PC/ABS/CF 合金的增容性能[J].塑料，2026,55 (3):146-152.

[26]WANG Xiudie, JI Xiangyang, WANG Xu, et al. Synthesis of Hyperbranched Amide Compatibilizer and the Compatibilizing Performance in PC/ABS/CF Alloys[J].Plastics,2026,55 (3):146-152.

[27]袁浩坤，李海燕，张昊辉，等.壳聚糖-水铝钙石复合材料制备及其对 PVC 性能影响[J].塑料，2026,55 (3):153-157.

[27]YUAN Haokun, LI Haiyan, ZHANG Haohui, et al. Preparation of Chitosan-Hydrocalumite Composite and Its Influence on PVC Properties[J].Plastics,2026,55 (3):153-157.

[28]赵宏岩，周青，杨雷，等.基体调控对硅橡胶力学性能的影响[J].塑料，2026,55 (3):158-164.

[28]ZHAO Hongyan, ZHOU Qing, YANG Lei, et al. Effect of Matrix Regulation on Mechanical Properties of Silicone Rubber[J].Plastics,2026,55 (3):158-164.

[29]齐力伟，吴凯宇，倪忠斌，等.半氢化 SEBS 对 PS/PPO 共混材料发泡性能的影响[J].塑料，2026,55 (3):165-170.

[29]QI Liwei, WU Kaiyu, NI Zhongbin, et al. Effect of Semi-Hydrogenated SEBS on the Foaming Performance of PS/PPO Blended Materials[J].Plastics,2026,55 (3):165-170.

[30]王培，周晓霞，李静宇，等.载姜黄素生物材料的制备及性能[J].塑料，2026,55 (3):171-175.

[30]WANG Pei, ZHOU Xiaoxia, LI Jingyu, et al. Preparation and Performance of Curcumin-Loaded Biomedical Materials[J].Plastics,2026,55 (3):171-175.

[31]洪维，张留伟，符立华，等.基于 Moldflow 的后背门上护板本体顺序阀热流道注塑模设计[J].塑料，2026,55 (3):176-181.

[31]HONG Wei, ZHANG Liuwei, FU Lihua, et al. Design of Hot Runner Injection Mold with Sequential Valve for Rear Door Upper Guard Body Based on Moldflow[J].Plastics,2026,55 (3):176-181.

[32]王建玲，张景，王霞，等.一种自动脱螺纹浇注系统凝料自动脱落的注射模设计[J].塑料，2026,55 (3):182-186.

[32]WANG Jianling, ZHANG Jing, WANG Xia, et al. Design of an Injection Mold with Automatic Thread Removal and Automatic Shedding of Sprue System Condensate[J].Plastics,2026,55 (3):182-186.

[33]梁莉，葛颖颖，闻子旭，等.基于 CAE 优化的花座造型洗涤瓶盖注塑模设计[J].塑料，2026,55 (3):187-193.

[33]LIANG Li, GE Yingying, WEN Zixu, et al. Design of Injection Mold for Flower Seat Shaped Washing Bottle Cap Based on CAE Optimization[J].Plastics,2026,55 (3):187-193.

[34]马明娟，汪珉，张海峰.家用智能米柜外壳四面抽芯机构热流道注塑模的设计[J].塑料，2026,55 (3):194-198.

[34]MA Mingjuan, WANG Min, ZHANG Haifeng. Design of the Hot Runner Injection Mould with Four Sided Core Pulling Mechanism for Household Intelligent Rice Cabinet Shell[J].Plastics,2026,55 (3):194-198.

[35]曹嘉益，王云彬，马宇轩，等.新型磷氮阻燃固化剂的合成及应用[J].塑料，2026,55 (3):199-204.

[35]CAO Jiayi, WANG Yunbin, MA Yuxuan, et al. Synthesis and Application of New Phosphorus Nitrogen Flame Retardant Curing Agent[J].Plastics,2026,55 (3):199-204.

[36]罗密.基于 Nano-TiO?/PDA 的服用棉织物紫外线屏蔽涂层[J].塑料，2026,55 (3):205-209.

[36]LUO Mi. Ultraviolet Shielding Coating for Wearable Cotton Fabric Based on Nano-TiO?/PDA[J].Plastics,2026,55 (3):205-209.

[37]莫盼盼，郭楠，程玲玲，等.血管鞘的粘接性能影响因素分析[J].塑料，2026,55 (3):210-215.

[37]MO Panpan, GUO Nan, CHENG Lingling, et al. Analysis of Factors Affecting the Adhesive Performance of Vascular Sheath[J].Plastics,2026,55 (3):210-215.

[38]赵惠娟，牛丽丽，吴曲璇，等.生物质碳/聚苯胺复合电极材料的电化学性能[J].塑料，2026,55 (3):216-220.

[38]ZHAO Huijuan, NIU Lili, WU Quxuan, et al. Electrochemical Properties of Biomass Carbon/Polyaniline Composite Electrode Materials[J].Plastics,2026,55 (3):216-220.