[1] 郑雅琦，李国梁，张金庆，等.废塑料催化裂解技术及其反应器的进展[J]. 塑料，2026,55 (2):1-6.

[1] ZHENG Yaqi, LI Guoliang, ZHANG Jinqing, et al. Development of Catalytic Cracking Technology of Waste Plastic and Reactor[J].Plastics,2026,55 (2):1-6.

[2] 朱浩宇，蔡建臣，薛平，等.废旧纺织品高效回收与综合化利用技术的进展[J]. 塑料，2026,55 (2):7-13.

[2] ZHU Haoyu, CAI Jianchen, XUE Ping, et al. Advances in Efficient Recycling and Resource Recovery Technologies for Waste Textiles[J].Plastics,2026,55 (2):7-13.

[3] 张先康，李城，李斌，等.塑料化学回收中的催化剂[J]. 塑料，2026,55 (2):14-21.

[3] ZHANG Xiankang, LI Cheng, LI Bin, et al. Catalysts in Chemical Recycling ofPlastics[J].Plastics,2026,55 (2):14-21.

[4] 李佳乐，乔梁，杨荣杰.苯基丙烯酸酯基POSS(PMPOSS)对PET综合性能的影响[J]. 塑料，2026,55 (2):22-28.

[4] LI Jiale, QIAO Liang, YANG Rongjie. Effect of Phenylacrylate-Based POSS (PMPOSS) on Comprehensive Properties of PET[J].Plastics,2026,55 (2):22-28.

[5] 谢腾，胡海霞.石墨微片含量对环氧树脂基复合材料力学性能及导电性能的影响[J]. 塑料，2026,55 (2):29-33.

[5] XIE Teng, HU Haixia. Effect of Graphene Nanoplatelets Content on the Mechanical Properties and Electrical Conductivity of Epoxy Resin Matrix Composites[J].Plastics,2026,55 (2):29-33.

[6] 徐杰，余欣蔚，张芳清，等.交联型OBC/LDPE的共混改性及发泡性能[J]. 塑料，2026,55 (2):34-37.

[6] XU Jie, YU Xinwei, ZHANG Fangqing, et al. Preparation and Properties of Cross-Linked OBC/LDPE Foam Materials[J].Plastics,2026,55 (2):34-37.

[7] 朱海霞，黄伟才，姚泽丰，等.POE 含量对PE/POE流延膜及微孔膜结构与性能的影响[J]. 塑料，2026,55 (2):38-43.

[7] ZHU Haixia, HUANG Weicai, YAO Zefeng, et al. Effect of POE Content on the Microstructure and Properties of PE/POE Blended Cast Films and Microporous Films[J].Plastics,2026,55 (2):38-43.

[8] 杨一钊，刘洪，赵子庚，等.PTFE 复合材料的摩擦磨损性能与力学性能[J]. 塑料，2026,55 (2):44-50.

[8] YANG Yizhao, LIU Hong, ZHAO Zigeng, et al. Friction and Wear Properties and Mechanical Properties of PTFE Composite[J].Plastics,2026,55 (2):44-50.

[9] 陈婷，张青海，曾长林，等.ACMSt对PLA流变性能和结晶性能的影响[J]. 塑料，2026,55 (2):51-57.

[9] CHEN Ting, ZHANG Qinghai, CAO Changlin, et al. Influence of AGMSt on the Rheological and Crystallization Properties of PLA[J].Plastics,2026,55 (2):51-57.

[10] 郭丹，张嘉明，张力文.机械力化学辅助导热绝缘环氧树脂复合材料的制备与性能[J]. 塑料，2026,55 (2):58-61.

[10] GUO Dan, ZHANG Jiaming, ZHANG Liwen. Performance of Thermally Conductive and Electrical Insulating Epoxy Resin-Based Composites Prepared Through Mechanochemical Processing[J].Plastics,2026,55 (2):58-61.

[11] 赵建华，廖俊杰，张梦雪，等.HCl/KH550/纳米 SiO?改性 BF 对聚丙烯力学性能的影响[J]. 塑料，2026,55 (2):62-66.

[11] ZHAO Jianhua, LIAO Junjie, ZHANG Mengxue, et al. Effect of HCl/KH550/Nano-SiO? Modified BF on Mechanical Properties of Polypropylene[J].Plastics,2026,55 (2):62-66.

[12] 邰燕芳，汪启涛，陈佳慧，等.维生素C磷酸酯镁/聚乳酸复合材料的制备与性能[J]. 塑料，2026,55 (2):67-70.

[12] TAI Yanfang, WANG Qitao, CHEN Jiahui, et al. Properties and Preparation of Polylactic Acid Magnesium Vitamin C Phosphate[J].Plastics,2026,55 (2):67-70.

[13] 梁乃川，马雄，唐文睿，等.PEW-g-MAH 的制备及其在 HDPE/稻壳粉中的应用[J]. 塑料，2026,55 (2):71-76.

[13] LIANG Naichuan, MA Xiong, TANG Wenrui, et al. Preparation of PEW-g-MAH and the Application in HDPE/Rice Husk Powder[J].Plastics,2026,55 (2):71-76.

[14] 唐君杰，李永健，关喜旺，等.编织碳纤维与短切玻璃纤维增强尼龙 66 的性能[J]. 塑料，2026,55 (2):77-83.

[14] TANG Junjie, LI Yongjian, GUAN Xiwang, et al. Performance of Braided Carbon Fiber and Chopped Glass Fiber Reinforced Nylon 66[J].Plastics,2026,55 (2):77-83.

[15] 陈业中，高华键，欧阳春平，等.PBAT结构对PBAT/PLA/CaCO?共混薄膜力学与延时边封性能的影响[J]. 塑料，2026,55 (2):84-90.

[15] CHEN Yezhong, CAO Huajian, OUYANG Chunping, et al. Effect of PBAT Structure on the Mechanical and Delayed Edge Sealing Properties of PBAT/PLA/CaCO? Blended Films[J].Plastics,2026,55 (2):84-90.

[16] 谭赞武，聂艳平，贺柳操，等.汽车进气歧管热流道注塑模设计[J]. 塑料，2026,55 (2):91-96.

[16] TAN Zanwu, NIE Yanping, HE Liucao, et al. Design of Injection Mold for Hot Runner of Automobile Intake Manifold[J].Plastics,2026,55 (2):91-96.

[17] 林茂兴，李胜强，周平会.咖啡壶外壳多次抽芯哈弗型滑块机构注塑模设计[J]. 塑料，2026,55 (2):97-102.

[17] LIN Maoxing, LI Shengqiang, ZHOU Pinghui. Design of Injection Mould with Half-Slider Mechanism Multiple Core Pulling for Coffee Pot Shell[J].Plastics,2026,55 (2):97-102.

[18] 王金莲，易永余.吸尘器手柄双色注塑模具设计[J]. 塑料，2026,55 (2):103-110.

[18] WANG Jinlian, YI Yongyu. Design of Dual-Color Injection Mold for Vacuum Cleaner Handle[J].Plastics,2026,55 (2):103-110.

[19] 罗达.90°空间扭曲弯管旋转抽芯机构模具设计[J]. 塑料，2026,55 (2):111-116.

[19] LUO Da. Mould Design with Rotating Core Pulling for a 90° Space Twisted Bend Tube[J].Plastics,2026,55 (2):111-116.

[20] 童宏永，左桂兰，杨少增，等.基于CAE优化的洗发露折叠瓶盖前后模强脱热流道注塑模设计[J]. 塑料，2026,55 (2):117-122.

[20] TONG Hongyong, ZUO Guilan, YANG Shaozeng, et al. Design of Hot Runner Injection Mould with Fixed-Moving Mould Forced Demoulding for Shampoo Folding Bottle Cap Based on CAE Optimization[J].Plastics,2026,55 (2):117-122.

[21] 王明伟，妙磊，吴迪，等.基于灰色关联度分析的杯托面板饰条注塑工艺优化[J]. 塑料，2026,55 (2):123-128.

[21] WANG Mingwei, MIAO Lei, WU Di, et al. Optimization of Injection Molding Process of Cup Support Panel Molding Strip Based on Grey Relational Degree Analysis[J].Plastics,2026,55 (2):123-128.

[22] 张晗，王明伟，吴迪，等.汽车副仪表板注塑成型工艺多目标优化[J]. 塑料，2026,55 (2):129-135.

[22] ZHANG Han, WANG Mingwei, WU Di, et al. Multi-Objective Optimization of Automotive Sub-Instrument Panel Injection Molding Process[J].Plastics,2026,55 (2):129-135.

[23] 王昌，张纹睿.基于 Workbench 的注塑机射嘴分析及优化[J]. 塑料，2026,55 (2):136-140.

[23] WANG Chang, ZHANG Wenrui. Analysis and Optimization of Injection Molding Machine Nozzle Based on Workbench[J].Plastics,2026,55 (2):136-140.

[24] 孙健，贾儒，乌日开西?艾依提，等.螺杆挤出式3D打印HA/PEK复合材料成型参数优化[J]. 塑料，2026,55 (2):141-145.

[24] SUN Jian, JIA Ru, WURIKAIXI Aiyiti, et al. Optimization of Molding Parameters of Screw Extrusion 3D Printing HA/PEEK Composite[J].Plastics,2026,55 (2):141-145.

[25] 康佳裕，王帅，孙蔚，等.含聚氨酯阻燃性能的 ReaxFF MD 分子动力学模拟[J]. 塑料，2026,55 (2):146-152.

[25] KANG Jiayu, WANG Shuai, SUN Wei, et al. ReaxFF MD Molecular Dynamics Simulation of Flame Retardant Properties of Phosphorus-Containing Polyurethanes[J].Plastics,2026,55 (2):146-152.

[26] 毛良冬，彭建，吴德洋，等.超临界二氧化碳发泡法制备聚丙烯基微纳尺寸泡孔发泡材料[J]. 塑料，2026,55 (2):153-159.

[26] MAO Liangdong, PENG Jian, WU Deyang, et al. Preparation of Polypropylene-Based Micro-Nano-Sized Cell Foamed Materials by Supercritical Carbon Dioxide Foaming Method[J].Plastics,2026,55 (2):153-159.

[27] 陈强，石艳，罗毅，等.聚合釜内聚氯乙烯颗粒的流动特性[J]. 塑料，2026,55 (2):160-165.

[27] CHEN Qiang, SHI Yan, LUO Yi, et al. Flow Characterization of Polyvinyl Chloride Particles in Polymerization Autoclave[J].Plastics,2026,55 (2):160-165.

[28] 金伟，苏永生，刘剑，等.基于增强体的PLA增材制造工艺现状及进展[J]. 塑料，2026,55 (2):166-172.

[28] JIN Wei, SU Yongsheng, LIU Jian, et al. Status and Progress of Additive Manufactured PLA Based on Reinforcements[J].Plastics,2026,55 (2):166-172.

[29] 段为朋，黄国栋，彭广盼，等.UHMWPE表面织构的进展[J]. 塑料，2026,55 (2):173-177.

[29] DUAN Weipeng, HUANG Guodong, PENG Guangpan, et al. Progress on Surface Texture of UHMWPE[J].Plastics,2026,55 (2):173-177.

[30] 何智锋，赵广慧，刘涛，等.聚合物基层合板螺栓连接力学性能的进展[J]. 塑料，2026,55 (2):178-184.

[30] HE Zhifeng, ZHAO Guanghui, LIU Tao, et al. Advance on Mechanical Properties of Bolted Polymer Matrix Composite Laminates[J].Plastics,2026,55 (2):178-184.

[31] 卢菲，封嗣中，郝润霞，等.PET食品包装膜的降解技术[J]. 塑料，2026,55 (2):185-191.

[31] LU Fei, FENG Sizhong, HAO Runxia, et al. Degradation Testing Technology for PET Food Packaging Films[J].Plastics,2026,55 (2):185-191.

[32] 邓静倩，侯丹丹，祁丽亚，等.多孔聚苯乙烯微球制备及成孔技术的进展[J]. 塑料，2026,55 (2):192-198.

[32] DENG Jingqian, HOU Dandan, QI Liya, et al. Progress on Preparation and Pore Forming Technology of Porous Polystyrene Microspheres[J].Plastics,2026,55 (2):192-198.

[33] 赵竹，丁现达，王坤，等.两亲聚合物抗粘附PVC材料的制备及性能[J]. 塑料，2026,55 (2):199-204.

[33] ZHAO Zhu, DING Xianda, WANG Kun, et al. Preparation and Properties of Amphiphilic Polymer Anti-Adhesion PVC Materials[J].Plastics,2026,55 (2):199-204.

[34] 李耀，胡志宇，姜锋，等.高透明聚酰胺 6/66 树脂的制备及性能[J]. 塑料，2026,55 (2):205-211.

[34] LI Yao, HU Zhiyu, JIANG Feng, et al. Preparation and Performance of Highly Transparent Polyamide 6/66 Resin[J].Plastics,2026,55 (2):205-211.

[35] 张志峰，李森，陈震，等.生物基聚对苯二甲酸-癸二酸丁二醇酯的制备与性能[J]. 塑料，2026,55 (2):212-215.

[35] ZHANG Zhifeng, LI Sen, CHEN Zhen, et al. Preparation and Properties of Bio-Based Polyethylene Terephthalic Acid-Butylene Glycol Sebacate[J].Plastics,2026,55 (2):212-215.

[36] 黄帅，孙平昌，吾满江?艾力，等.紫外线固化丙烯酰胺型有机硅聚合物的合成及性能[J]. 塑料，2026,55 (2):216-220.

[36] HUANG Shuai, SUN Pingchang, WUMANJIANG Aili, et al. Synthesis and Properties of UV-Curable Acrylamide-Based Silicone Polymers[J].Plastics,2026,55 (2):216-220.