塑料

中文 | English

首页期刊简介投稿指南编委会期刊订阅广告合作党群工作电子期刊联系我们

在线办公

1972年创刊，双月刊
主管：北京一轻科技集团有限公司
主办：北京市塑料研究所有限公司
主编：杨明锦
出版：《塑料》编辑部
地址：北京市西城区旧鼓楼大街
　　　47号
邮编：100009
电话：(010)84022529,84035979
传真：(010)84022529,64077552
E-mail:plastics1972@163.com
国内邮发代号：82-268
国外邮发代号：BM909
ISSN 1001-9456
CN 11-2205/TQ

本期导读

专题：3D 打印 PEEK 复合材料的性能

[1]夏东祥，乌日开西?艾依提，阿依古丽?喀斯木. GF/PEEK 复合材料的 3D 打印工艺参数优化 [J]. 塑料，2025, 54 (6):1-7.

[1] XIA Dongxiang, WURIKAIXI Aiyiti, AYIGULI Kasimu. Optimization of 3D Printing Process Parameters for GF/PEEK Composites [J]. Plastics, 2025, 54 (6):1-7.

[2] 梁美芹，刘晓军. 3D 打印连续玻璃纤维 / PEEK 复合材料的层间性能 [J]. 塑料，2025, 54 (6):8-13.

[2] LIANG Meiqin, LIU Xiaojun. Interlayer Property of 3D Printed Continuous Glass Fiber/PEEK Composite Material [J]. Plastics, 2025, 54 (6):8-13.

[3] 雷奶琴，乌日开西?艾依提. 3D 打印 CF/PEEK 复合材料的导热性能分析 [J]. 塑料，2025, 54 (6):14-19.

[3] LI Naiqin, WURIKAIXI Aiyiti. Thermal Conductivity Analysis of 3D Printed CF/PEEK Composites [J]. Plastics, 2025, 54 (6):14-19.

合成与制备

[4]王文昊，韩杨，刘淼，等.基于层压成型的隐形矫治用多层膜片制备 [J]. 塑料，2025, 54 (6):20-24.

[4] WANG Wenhao, HAN Yang, LIU Miao,et al. Preparation of Multilayer Diaphragms for Invisible Orthodontic Treatment Based on Laminate Molding [J]. Plastics, 2025, 54 (6):20-24.

[5] 郑峻，徐志淳，任红星，等.腰果酚丙烯酸酯单体的合成及应用 [J]. 塑料，2025, 54 (6):25-30.

[5] ZHENG Jun, XU Zhichun, REN Hongxing,et al. Synthesis and Application of Cardanol Acrylate Monomer [J]. Plastics, 2025, 54 (6):25-30.

[6] 黄有华，艾永平.不同催化剂对制备新型阻燃剂产率的影响 [J]. 塑料，2025, 54 (6):31-35.

[6] HUANG Youhua, AI Yongping. Effect of Different Catalysts on the Yield of Preparing New Flame Retardants [J]. Plastics, 2025, 54 (6):31-35.

成型加工与理论

[7] 李长金，李好义，郭子芳，等.熔体电纺复合纤维膜结构调控及热压增强性能 [J]. 塑料，2025, 54 (6):36-41.

[7] LI Changjin, LI Haoyi, GUO Zifang,et al. Structure Control of Melt Differential Electrospinning Composite Fiber Membranes and Thermal Pressing Enhancement Performance [J]. Plastics, 2025, 54 (6):36-41.

[8] 郭塞，孙志强，张百威，等.表面氧化对双相钢 / 塑料热压连接强度的影响机理 [J]. 塑料，2025, 54 (6):42-46.

[8] GUO Sai, SUN Zhiqiang, ZHANG Baiwei,et al. Effect of Surface Oxidation on Bonding Strength of Dual Phase Steel/Plastic Hot-Pressing Joints [J]. Plastics, 2025, 54 (6):42-46.

[9] 李亚峰，张茗昱，刘硕，等.一种新的塑料热裂解动力学模型计算方法 [J]. 塑料，2025, 54 (6):47-51.

[9] LI Yafeng, ZHANG Mingyu, LIU Shuo,et al. A New Method for Calculating the Kinetic Model of Plastic Pyrolysis Plastics[J]. Plastics, 2025, 54 (6):47-51.

计算机辅助设计与数据库

[10] 徐珍，王熙霖，黄志刚.滑移条件下螺杆转速对双螺杆挤出过程的影响 [J]. 塑料，2025, 54 (6):52-60.

[10] XU Zhen, WANG Xilin, HUANG Zhigang. Influence of Screw Speed on Twin Screw Extrusion Process Under Slip Condition [J]. Plastics, 2025, 54 (6):52-60.

[11] 陈开源，王颖.基于 CAE 的储钱罐组合型腔流动平衡优化分析 [J]. 塑料，2025, 54 (6):61-65.

[11] CHEN Kaiyuan, WANG Ying. Optimal Analysis of Flow Balance of Money Box Combined Cavity Based on CAE [J]. Plastics, 2025, 54 (6):61-65.

[12] 王晨阳，王建康，李志军，等.穿孔 Kenics 静态混合器的正交优化及性能分析 [J]. 塑料，2025, 54 (6):66-70.

[12] WANG Chenyang, WANG Jiankang, LI Zhijun,et al. Orthogonal Optimization and Performance Analysis of Perforated Kenics Static Mixer [J]. Plastics, 2025, 54 (6):66-70.

[13] 王星星，王德义，孟德建，等.基于响应曲面的多型腔模具设计与参数优化 [J]. 塑料，2025, 54 (6):71-77.

[13] WANG Xingxing, WANG Deyi, MENG Dejian,et al. Multi-Cavity Mold Design and Parameter Optimization Based on Response Surface [J]. Plastics, 2025, 54 (6):71-77.

[14] 邹文，杨志，张莉，等.拉链下止注塑成型工艺参数的优化 [J]. 塑料，2025, 54 (6):78-83.

[14] ZOU Wen, YANG Zhi, ZHANG Li,et al. Optimization of Zipper Bottom Stopper Injection Molding Process Parameters [J]. Plastics, 2025, 54 (6):78-83.

[15] 姚俊，朱骄阳，齐宏博，等.锥形单螺杆的侧边结构对挤出流场的影响 [J]. 塑料，2025, 54 (6):84-88.

[15] YAO Jun, ZHU Jiaoyang, QI Hongbo,et al. Influence of Side Structure of Tapered Single Screw on Extrusion Flow Field [J]. Plastics, 2025, 54 (6):84-88.

改性与合金

[16] 孙树卿，袁瑞，高莉，等.疏水烷基链对邻苯类增塑剂增塑性能的影响 [J]. 塑料，2025, 54 (6):89-94.

[16] SUN Shuqing, YUAN Rui, GAO Li,et al. Effect of Hydrophobic Alkyl Chains on the Plasticization Properties of O-Phenylene Plasticisers [J]. Plastics, 2025, 54 (6):89-94.

[17] 安熠，张泽超，李宁，等.连续辊压 - 空间限域强制组装制备功能材料 [J]. 塑料，2025, 54 (6):95-100.

[17] AN Yi, ZHANG Zechao, LI Ning,et al. Preparation of Functional Materials by Continuous Roll-Space Limited Forced Assembly Method [J]. Plastics, 2025, 54 (6):95-100.

[18] 肖鹏，王蕾.木粉 / 聚苯乙烯复合材料的制备与性能 [J]. 塑料，2025, 54 (6):101-106.

[18] XIAO Peng, WANG Lei. Preparation and Properties of Wood Flour/Polystyrene Composites [J]. Plastics, 2025, 54 (6):101-106.

[19] 杨陈，程蓓，林燕萍. Si/WPU 复合材料的制备及用作棉织物的疏水涂层 [J]. 塑料，2025, 54 (6):107-111.

[19] YANG Chen, CHENG Bei, LIN Yanping. Preparation of Si/WPU Composites and the Application as Hydrophobic Coatings for Cotton Fabric [J]. Plastics, 2025, 54 (6):107-111.

[20] 贺晓亚，隋丹婷.表面修饰 GO/WPU 对棉织物的改性与性能表征 [J]. 塑料，2025, 54 (6):112-116.

[20] HE Xiaoya, SUI Danting. Modification and Characterization of Cotton Fabric by Modified GO/WPU [J]. Plastics, 2025, 54 (6):112-116.

[21] 汪波，万茂生，画莉，等.硼酸苯酯改性碳酸钙及其聚丙烯复合材料 [J]. 塑料，2025, 54 (6):117-122.

[21] WANG Bo, WAN Maosheng, HUA Li,et al. Cyclic Boronic Acid Phenyl Ester Modified Calcium Carbonate and the Polypropylene Composite Material [J]. Plastics, 2025, 54 (6):117-122.

[22] 姚洋，汪艳. 3D 打印低密度聚乙烯的辐照交联发泡 [J]. 塑料，2025, 54 (6):123-128.

[22] YAO Yang, WANG Yan. Low-Density Polyethylene of Irradiation Crosslinking Foaming by 3D Printing [J]. Plastics, 2025, 54 (6):123-128.

[23] 王蕾，肖鹏. PP/PET 共混物的制备及性能 [J]. 塑料，2025, 54 (6):129-135.

[23] WANG Lei, XIAO Peng. Preparation and Properties of PP/PET Blends [J]. Plastics, 2025, 54 (6):129-135.

发展与动态

[24] 张露，祖立武，张微，等.水滑石 / 树脂复合材料的进展 [J]. 塑料，2025, 54 (6):136-142.

[24] ZHANG Lu, ZU Liwu, ZHANG Wei,et al. Progress of Hydrotalcite/Resin Composite [J]. Plastics, 2025, 54 (6):136-142.

[25] 王悦，侯佳乐，唐波，等.高导热性复合材料三维制备方法的综述 [J]. 塑料，2025, 54 (6):143-149.

[25] WANG Yue, HOU Jiale, TANG Bo,et al. Summary of 3D Preparation Methods of High Thermal Conductivity Composites [J]. Plastics, 2025, 54 (6):143-149.

[26] 李长金，刘文龙，杨卫民，等.静电纺丝技术的发展与应用 [J]. 塑料，2025, 54 (6):150-155.

[26] LI Changjin, LIU Wenlong, YANG Weimin,et al. Development and Application of Electrospinning Technology [J]. Plastics, 2025, 54 (6):150-155.

[27] 曾永攀.可生物降解聚合物的熔融共混和化学改性的综述 [J]. 塑料，2025, 54 (6):156-165.

[27] ZENG Yongpan. Review of Melt Blending and Chemical Modification of Biodegradable Polymers [J]. Plastics, 2025, 54 (6):156-165.

标准与测试

[28] 付饶，卫碧文，王佳琦.热裂解气相色谱质谱法快速筛查玩具材料中短链氯化石蜡 [J]. 塑料，2025, 54 (6):166-171.

[28] FU Rao, WEI Biwen, WANG Jiaqi. Rapid Analysis of Short Chain Chlorinated Paraffins in Toy Materials by Pyrolysis Gas Chromatography-Mass Spectrometry [J]. Plastics, 2025, 54 (6):166-171.

机头与模具

[29] 张丹，王保成.基于 CAE 优化的计算机芯片塑封外壳模具设计 [J]. 塑料，2025, 54 (6):172-177.

[29] ZHANG Dan, WANG Baocheng. Design of Computer Chip Plastic Encapsulation Shell Mold Based on CAE Optimization [J]. Plastics, 2025, 54 (6):172-177.

[30] 宗丹丹，成得煋.基于柔性视觉和复合材料造型的安全椅龙骨塑件及成型模具设计 [J]. 塑料，2025, 54 (6):178-184.

[30] ZONG Dandan, CHENG Dexing. Design of Safety-Chair-Keel Plastic-Parts and Forming-Mould Based on Flexible-Vision and Composite Material Modeling [J]. Plastics, 2025, 54 (6):178-184.