改性与合金特辑
[1] 姬祥, 刘国强, 姜卫华,等. 二乙基次膦酸铝与三嗪类大分子成炭剂在阻燃ABS树脂中的协同作用[J]. 塑料, 2025, 54(5):1-7.
[1] JI Xiang, LIU Guoqiang, JIANG Weihua, et al. Synergistic Effect of Aluminum Diethylphosphinate and Triazine-Based Macromolecule Charring Agent in Flame Retarded ABS Resin[J]. Plastics, 2025, 54(5):1-7.
[2] 马扶宸, 樊东焱, 李宇,等. 薰衣草废渣的表面处理技术对复合材料性能的影响[J]. 塑料, 2025, 54(5):8-13+21.
[2] MA Fuchen, FAN Dongyan, LI Yu, et al. Effect of Particle Size and Alkali Treatment on Properties of Lavender Distilled Waste/Epoxy Composites[J]. Plastics, 2025, 54(5):8-13+21.
[3] 康佳裕, 王帅, 李朋,等. 反应型含磷多元醇对聚氨酯泡沫性能的影响[J]. 塑料, 2025, 54(5):14-21.
[3] KANG Jiayu, WANG Shuai, LI Peng, et al. Effect of Reactive Phosphate-Containing Polyols on the Properties of Polyurethane Foam[J]. Plastics, 2025, 54(5):14-21.
[4] 王培, 牛丽丽, 李静宇,等. 载茶多酚医用敷料的快速制备及性能分析[J]. 塑料, 2025, 54(5):22-26+31.
[4] WANG Pei, NIU Lili, LI Jingyu, et al. Rapid Preparation and Performance Analysis of Tea Polyphenol Medical Dressings [J]. Plastics, 2025, 54(5):22-26+31.
[5] 武欣宇, 白珊, 艾国骏,等. 聚乳酸／丁二酸丙二醇酯齐聚物复合材料的制备及性能[J]. 塑料, 2025, 54(5):27-31.
[5] WU Xinyu, BAI Shan, AI Guojun, et al. Preparation and Properties Study of Poly(lactic Acid)/Propylene Succinate Oligomer Composites Materials[J]. Plastics, 2025,54(5):27-31.
[6] 黄鑫, 林明华, 徐定红,等. 改性磷石膏在管道用聚乙烯材料的应用[J]. 塑料, 2025, 54(5):32-35.
[6] HUANG Xin, LIN Minghua, XU Dinghong, et al. Resrarch Progress of Polyethylene Pipe Connection Technology [J]. Plastics, 2025, 54(5):32-35.
[7] 何平, 洪磊, 许晨曦,等. 回收废旧玻璃纤维及聚氨酯再生制备保温板的性能[J]. 塑料, 2025, 54(5):36-40.
[7] HE Ping, HONG Lei, XU Chenxi, et al. Properties of Thermal Insulation Board Prepared by Recycled Waste Glass Fiber and Polyurethane[J]. Plastics, 2025, 54(5):36-40.
[8] 杨陈, 王诗佳, 林燕萍. CS／PLA复合膜的制备及性能表征[J]. 塑料, 2025, 54(5):41-45.
[8] YANG Chen, WANG Shijia, LIN Yanping. Preparation and Characterization of CS/PLA Composite Menbranes[J]. Plastics, 2025, 54(5):41-45.
[9] 李宇, 彭博文, 吴金岩,等. 热处理对聚乳酸腰果酚复合材料性能的影响[J]. 塑料, 2025, 54(5):46-51+63.
[9] LI Yu, PENG Bowen, WU Jinyan, et al. Effect of Heat Treatment on Property of PLA Cardanol Phenol Composite[J]. Plastics, 2025, 54(5):46-51+63.
成型加工与理论
[10] 陈元民, 赵中里, 王胜利,等. 耐高温聚芳酯薄膜材料表面连续化疏水改性[J]. 塑料, 2025, 54(5):52-58.
[10] CHEN Yuanmin, ZHAO Zhongli, WANG Shengli, et al. Continuous Hydrophobic Modification of Surface of High-Temperature Resistant Polyarylate EsterFilm Materials [J]. Plastics, 2025, 54(5):52-58.
[11] 余乃泽, 裴伟娟, 李大伟. 面向机器人关节轴承的PTFE／PEEK多孔材料制备与力学性能[J]. 塑料, 2025, 54(5):59-63.
[11] YU Naize, PEI Weijuan, LI Dawei. Preparation and Mechanical Properties of PTFE/PEEK Porous Materials for Robot Joint Bearings[J]. Plastics, 2025, 54(5):59-63.
[12] 郭塞, 洪少良, 王世乙,等. 激光表面处理优化提升铝合金／塑料连接强度[J]. 塑料, 2025, 54(5):64-71+85.
[12] GUO Sai, HONG Shaoliang, WANG Shiyi, et al. Optimization of Laser Surface Treatment Parameters for Strength Improvement of Aluminum Alloy/Plastic Hot-Pressing Joints [J]. Plastics, 2025, 54(5):64-71+85.
机头与模具
[13] 庄雨乐, 赵利平, 张维合,等. U型弯管分段多次滑块抽芯的注塑模具设计[J]. 塑料, 2025, 54(5):72-77+128.
[13] ZHUANG Yule, ZHAO Liping, ZHANG Weihe, et al. Design of Injection Mould for Pulling Core of Multiple Sliders in U-shaped Bend Pipe Segmented[J]. Plastics, 2025, 54(5):72-77+128.
[14] 王得胜, 王秉昱, 苏瞧忠. 汽车手套箱内斗注塑模的设计[J]. 塑料, 2025, 54(5):78-85.
[14] WANG Desheng, WANG Bingyu, SU Qiaozhong. Design of Injection Mold for Bucket Inside Car Glove Box [J]. Plastics, 2025, 54(5):78-85.
[15] 贺柳操, 张建军, 南丽霞. PLC保险盒盖双层叠模CAE分析与模具结构设计[J]. 塑料, 2025, 54(5):86-92+98.
[15] HE Liucao, ZHANG Jianjun, NAN Lixia. Design of Fuse-Box-Cover Double-Layer Stacked Structure and Automated Production Control Mechanwasm[J]. Plastics, 2025, 54(5):86-92+98.
[16] 刘瑞娟. 煤矿单级双吸离泵电机前罩注射模设计[J]. 塑料, 2025, 54(5):93-98.
[16] LIU Ruijuan. Design of Injection Mould for Front Cover of Single-Stage Double Suction Pump Motor in Coal Mine[J]. Plastics, 2025, 54(5):93-98.
标准与测试
[17] 梁壮, 张丹, 许凌子,等. 高密度聚乙烯瓶盖料中爽滑剂芥酸酰胺的析出规律[J]. 塑料, 2025, 54(5):99-105，164.
[17] LIANG Zhuang, ZHANG Dan, XU Lingzi, et al. Migration of Slippling Agent Erucamide
in High-Density Polyethylene Bottle Cap[J]. Plastics, 2025, 54(5):99-105+164.
[18] 张晨, 刘润田, 符晨涛,等. 固封极柱环氧树脂的电热绝缘老化特性分析[J]. 塑料, 2025, 54(5):106-110+115.
[18] ZHANG Chen, LIU Runtian, FU Chentao, et al. Analysis of Electrothermal Aging Characteristics on Epoxy Resin of Solid-Insulation-Embedded Pole[J]. Plastics, 2025, 54(5):106-110+115.
[19] 王礼军, 赵伟健, 章立清等. 滑石粉增强聚丙烯复合材料的热氧老化性能[J]. 塑料, 2025, 54(5):111-115.
[19] WANG Lijun, ZHAO Weijian, ZHANG Liqing, et al. Thermal-Oxidative Aging Properties of Talc-Enhanced Polypropylene Composite[J]. Plastics, 2025, 54(5):111-115.
[20] 苏英霞, 陈矗, 乔蒙. 新型皮革POE用于汽车内饰可行性分析－POE革、PVC革、PU革性能对比[J]. 塑料, 2025, 54(5):116-120+183.
[20] SU Yingxia, CHEN Chu, QIAO Meng. Feasibility Analysis of Using new Leather POE for Automotive Interior-Performance Comparison of POE Leather, PVC Leather, and PU Leather[J]. Plastics, 2025, 54(5):116-120+183.
降解塑料
[21] 刘佳, 余时明, 王敦,等. 木质素接枝聚己内酯共聚物对PLA／PBAT复合材料性能的影响[J]. 塑料, 2025, 54(5):121-128.
[21] LIU Jia, YU Shiming, WANG Dun, et al. Effect of Polycaprolactone Grafted Lignin Copolymer on the Properties of PLA/PBAT Composites[J]. Plastics, 2025, 54(5):121-128.
计算机辅助设计与数据库
[22] 姜旭, 毕凤阳, 刘长喜,等. 基于田口法的汽车大灯灯罩双色注塑工艺参数多目标优化[J]. 塑料, 2025, 54(5):129-134.
[22] JIANG Xu, BI Fengyang, LIU Changxi, et al. Multi-Objective Optimization of Two-Color Injection Molding Process Parameters of Automobile Headlight Lampshade Based on Taguchi Method[J]. Plastics, 2025, 54(5):129-134.
[23] 和康佳, 王立强, 张腾飞. 双曲肘合模机构的有限元分析与优化设计[J]. 塑料, 2025, 54(5):135-140，145.
[23] HE Kangjia, WANG Liqiang, ZHANG Tengfei. Finite Element Analysis and Optimization Design of Hyperbolic Elbow Clamping Mechanism[J]. Plastics, 2025, 54(5):135-140+145.
[24] 严继康, 杜凌, 鲁兴宇,等. 聚丙烯试样的翘曲变形工艺参数优化分析[J]. 塑料, 2025, 54(5):141-145.
[24] YAN Jikang, DU Ling, LU Xingyu, et al. Optimization Analysis of Warping Deformation Process Parameters for Polypropylene Samples[J]. Plastics, 2025, 54(5):141-145.
[25] 郭玉波, 崔琦. FDM 成型PLA件有限元模拟及成型工艺分析[J]. 塑料, 2025, 54(5):146-152+158.
[25] GUO Yubo, CUI Qi. Finite Element Simulation and Forming Process Analysis of FDM Molded PLA Parts[J]. Plastics, 2025, 54(5):146-152+158.
[26] 王晓宏, 王馨锐, 刘长喜,等. 碳纤维复合材料正弦波曲面膜盘结构的设计与试验验证[J]. 塑料, 2025, 54(5):153-158.
[26] WANG Xiaohong, WANG Xinrui, LIU Changxi, et al. Design and Test Verification of Sine-Wave Curved Carbon Fiber Composite Elastic Membrane Plate Structure[J]. Plastics, 2025, 54(5):153-158.
[27] 钟璞, 黄可, 王闯. 轿车用车灯罩注塑参数优化及试验验证[J]. 塑料, 2025, 54(5):159-164.
[27] ZHONG Pu, HUANG Ke, WANG Chuang. Optimization and Test Verification of Injection Molding Parameters of Car Lampshade[J]. Plastics, 2025, 54(5):159-164.
[28] 文仁兴, 张蔚. 酒瓶盖中套的结构和成型工艺优化设计[J]. 塑料, 2025, 54(5):165-170，188.
[28] WEN Renxing, ZHANG Wei. Optimization Design of Structural and Forming Process of Wine Bottle Cap[J]. Plastics, 2025, 54(5):165-170+188.
发展与动态
[29] 郝彬彬, 周新宇, 赖全勇,等. 磺化苯乙烯－马来酸酐共聚物的合成及应用进展[J]. 塑料, 2025, 54(5):171-176.
[29] HAO Binbin, ZHOU Xinyu, LAI Quanyong, et al. Progress in the Synthesis and Application of Sulfonated Styrene-Maleic Anhydride Copolymers[J]. Plastics, 2025, 54(5):171-176.
[30] 李一凡, 黎文海. 用作快速检测双酚A的电化学传感器发展现状[J]. 塑料, 2025, 54(5):177-183.
[30] LI Yifan, LI Wenhai. Development of Electrochemical Sensors for Rapid Detection of Bisphenol A[J]. Plastics, 2025, 54(5):177-183.
[31] 姜向新, 杨霄云, 吴国峰,等. 聚丙烯热氧老化影响因素的进展[J]. 塑料, 2025, 54(5):184-188.
[31] JIANG Xiangxin, YANG Xiaoyun, WU Guofeng, et al. Progress on Factors Affecting Thermal Oxidative Aging of Polypropylene[J]. Plastics, 2025, (5):184-188. |
