改性与合金特辑
[1] 耿伟政, 宋辉. 硅烷增容剂的制备及其在PC／ABS合金中的应用[J]. 塑料, 2025, 54(4):1-7.
[1] GENG Weizheng, SONG Hui. Synthesis of Silane Compatibilizer and The Application in PC/ABS Alloys[J]. Plastics, 2025, 54(4):1-7.
[2] 王永晖, 贾新磊, 许兰娟,等. 有机蒙脱土改性对环氧树脂阻燃性能的影响[J]. 塑料, 2025, 54(4):8-12+17.
[2] WANG Yonghui, JIA Xinlei, XU Lanjuan, et al. Effect of Organic Montmorillonite Modification on the Flame Retardancy Properties of Epoxy Resin[J]. Plastics, 2025, 54(4):8-12+17.
[3] 涂志刚, 谢波, 周先进. 时效稳定抗静电BOPP薄膜的开发[J]. 塑料, 2025, 54(4):13-17.
[3] TU Zhigang, XIE Bo, ZHOU Xianjin. Development of Time-Stable Antistatic BOPP Films[J]. Plastics, 2025, 54(4):13-17.
[4] 蒋晓怡, 苏振乾, 吴锐,等. 共混PBS改善PBAT发泡材料的收缩性分析[J]. 塑料, 2025, 54(4):18-23+31.
[4] JIANG Xiaoyi, SU Zhenqian, WU Rui, et al. Shrinkage Analysis of PBAT Foam by Blending with PBS[J]. Plastics, 2025, 54(4):18-23+31.
[5] 潘菲, 徐志淳, 任红星,等. 光固化环氧－聚氨酯金属防腐涂料的制备与性能[J]. 塑料, 2025, 54(4):24-31.
[5] PAN Fei, XU Zhichun, REN Hongxing, et al. Preparation and Properties of UV Cured Epoxy-Polyurethane Anticorrosive Coatings[J]. Plastics, 2025, 54(4):24-31.
[6] 陈元民, 刘佳明, 张成辉,等. 原子层沉积增强减反射涂层表面耐磨性能[J]. 塑料, 2025, 54(4):32-36+44.
[6] CHEN Yuanmin, LIU Jiaming, ZHANG Chenghui, et al. Atomic Layer Deposition Enhances Surface Wear Resistance of Reflectance Reducing Coatings[J]. Plastics, 2025, 54(4):32-36+44.
[7] 张旺, 梁兵, 龙佳朋. 植酸钙改性水镁石对HDPE复合材料性能的影响[J]. 塑料, 2025, 54(4):37-44.
[7] ZHANG Wang, LIANG Bing, LONG Jiapeng. Effect of Calcium Phytate Modified Brucite on the Properties of HDPE Composite Materials[J]. Plastics, 2025, 54(4):37-44.
[8] 邸麟婷, 秦晨元, 王文英,等. 受阻酚类抗氧剂对交联聚乙烯结晶形态的影响[J]. 塑料, 2025, 54(4):45-49+54.
[8] DI Linting, QIN Chenyuan, WANG Wenying, et al. Impact of Hindered Phenol Antioxidants on the Crystalline Morphology of Crosslinked Polyethylene[J]. Plastics, 2025, 54(4):45-49+54.
[9] 喻文凯, 徐娟, 方松刚,等. R-PC／ABS／TSQ／HDP复合材料的制备及性能分析[J]. 塑料, 2025, 54(4):50-54.
[9] YU Wenkai, XU Juan, FANG Songgang, et al. Preparation and Properties Analysis of R-PC/ABS/TSQ/HDP Composite[J]. Plastics, 2025, 54(4):50-54.
[10] 王猛, 张明耀. 不同粒径PBL橡胶粒子对透明ABS树脂性能的影响[J]. 塑料, 2025, 54(4):55-59+64.
[10] WANG Meng, ZHANG Mingyao. Influences of Different Sizes of PBL Rubber Particles on the Properties of Transparent ABS Resin[J]. Plastics, 2025, 54(4):55-59+64.
[11] 王政芳. 改性蒙脱土／环氧树脂的制备及性能[J]. 塑料, 2025, 54(4):60-64.
[11] WANG Zhengfang. Preparation and Properties of Modified Montmorillonite/Epoxy Resin[J]. Plastics, 2025, 54(4):60-64.
结构与性能
[12] 朱勇斌, 张蔚, 曾凡松. 竹纤维／PLA捻合编织复合材料结构对其性能的影响[J]. 塑料, 2025, 54(4):65-70+75.
[12] ZHU Yongbin, ZHANG Wei, ZENG Fansong. Effect of Structure on the Properties of Twisted Woven Composite of Bamboo Fiber/PLA [J]. Plastics, 2025, 54(4):65-70+75.
[13] 朱源祥, 黄尧, 吴大鸣,等. 基于PDMS介质层的双层柔性电容式传感器[J]. 塑料, 2025, 54(4):71-75.
[13] ZHU Yuanxiang, HUANG Yao, WU Daming, et al. Two-Layer Flexible Capacitive Sensor Based on PDMS Dielectric Layer[J]. Plastics, 2025, 54(4):71-75.
成型加工与理论
[14] 李长金, 赵千龙, 郭子芳,等. 熔体微分电纺聚乳酸可降解复印纸的制备与性能[J]. 塑料, 2025, 54(4):76-82.
[14] LI Changjin, ZHAO Qianlong, GUO Zifang, et al. Preparation and Performance of Melt Differential Electrospinning Biodegradable Polylactic Acid Copier Paper[J]. Plastics, 2025, 54(4):76-82.
[15] 段书霞, 张恒, 周小婷,等. 防水透湿聚丙烯熔喷基包装材料的热复合工艺[J]. 塑料, 2025, 54(4):83-88.
[15] DUAN Shuxia, ZHANG Heng, ZHOU Xiaoting, et al. Thermal Lamination Process of Waterproof and Moisture-Permeable Polypropylene Melt Blown-Based Packaging Material[J]. Plastics, 2025, 54(4):83-88.
降解塑料
[16] 秦宜轩, 王耀彬, 王萍,等. 聚乳酸耐热改性的进展[J]. 塑料, 2025, 54(4):89-93.
[16] QIN Yixuan, WANG Yaobin, WANG Ping, et al. Progress on Heat Resistance Modification of Polylactic Acid[J]. Plastics, 2025, 54(4):89-93.
合成与制备
[17] 刘佳明, 强明浩, 黄尧,等. 基于丝网印刷制备高灵敏度脉诊微裂纹传感器[J]. 塑料, 2025, 54(4):94-99.
[17] LIU Jiaming, QIANG Minghao, HUANG Yao, et al. Preparation of Highly Sensitive Pulse Diagnostic Microcrack Sensors Based on Screen Printing[J]. Plastics, 2025, 54(4):94-99.
[18] 张桂春, 刘明亮, 周纪良. 车载用塑料基底超高强度减反膜的制备[J]. 塑料, 2025, 54(4):100-105.
[18] ZHANG Guichun, LIU Mingliang, ZHOU Jiliang. Preparation on Ultra-High-Strength Anti-Reflection Film on Plastic Substrate for Vehicle[J]. Plastics, 2025, 54(4):100-105.
计算机辅助设计与数据库
[19] 张莉彦, 杜翔宇, 丁玉梅,等. 微纳层叠挤出尼龙／无机粒子混合效果的工艺影响因素[J]. 塑料, 2025, 54(4):106-110+116.
[19] ZHANG Liyan, DU Xiangyu, DING Yumei, et al. Process Factors Influencing the Mixing Effect of Nylon/Inorganic Particles in Microlayer-Stacking Extrusion[J]. Plastics, 2025, 54(4):106-110+116.
[20] 赵永庆, 李永超, 圣文顺. 聚碳酸酯发光塑料的设计与模拟[J]. 塑料, 2025, 54(4):111-116.
[20] ZHAO Yongqing, LI Yongchao, SHENG Wenshun. Computer Design and Simulation of Polycarbonate Luminescent Plastic[J]. Plastics, 2025, 54(4):111-116.
[21] 马立勋, 王宗勇, 王丁,等. 射流管长度对管内中心多股射流混合的影响[J]. 塑料, 2025, 54(4):117-121+127.
[21] MA Lixun, WANG Zongyong, WANG Ding, et al. Effect of Jet Tube Length on Multi-Strand Jet Mixing in the Center of the Tube[J]. Plastics, 2025, 54(4):117-121+127.
[22] 胡心悦, 田跃宏, 刘海涛,等. 基于田口方法的汽车模内电子产品工艺优化[J]. 塑料, 2025, 54(4):122-127.
[22] HU Xinyue, TIAN Yuehong, LIU Haitao, et al. Automotive In-Mold Electronics Process Optimization Based on Taguchi Method[J]. Plastics, 2025, 54(4):122-127.
[23] 张春梅, 张清官, 孙铭,等. 叶片偏转角对叶片式静态混合器混合性能的影响[J]. 塑料, 2025, 54(4):128-133+139.
[23] ZHANG Chunmei, ZHANG Qingguan, SUN Ming, et al. Effect of Blade Deflection Angle on the Mixing Performance of Blade-Type Static Mixer[J]. Plastics, 2025, 54(4):128-133+139.
[24] 江浩华, 吴大鸣, 黄尧,等. 基于介电弹性体的发电护膝结构设计及性能[J]. 塑料, 2025, 54(4):134-139.
[24] JIANG Haohua, WU Daming, HUANG Yao, et al. Structural Design and Performance of Dielectric Elastomer-Based Knee Pads for Power Generation[J]. Plastics, 2025, 54(4):134-139.
[25] 丘宏岳, 江丽珍, 韩伟,等. 汽车风扇罩注塑模具的设计及结构优化[J]. 塑料, 2025, 54(4):140-144+188.
[25] QIU Hongyue, JIANG Lizhen, HAN Wei, et al. Design and Structural Optimization of Injection Mold for Automotive Fan Cover[J]. Plastics, 2025, 54(4):140-144+188.
机头与模具
[26] 余伟, 陆婷姬. 无人机龙骨塑件防损内螺纹抽芯机构及注射模设计[J]. 塑料, 2025, 54(4):145-150+181.
[26] YU Wei, LU Tingji. Design of Loss Prevention Internal Thread Core Pulling Mechanism and Injection Mould for UAV Keel Plastic Parts[J]. Plastics, 2025, 54(4):145-150+181.
[27] 于锦辉, 曹利元. 基于CAE的英语翻译器中控板IMD成型工艺与成型模设计[J]. 塑料, 2025, 54(4):151-156.
[27] YU Jinhui, CAO Liyuan. IMD-Process and Mould Design for Central-Control-Board of English-Translator Based on CAE[J]. Plastics, 2025, 54(4):151-156.
[28] 吴金娜, 周明浩, 周正军. 基于UG二次开发燕秀外挂的握力器柄注射模设计[J]. 塑料, 2025, 54(4):157-161.
[28] WU Jinna, ZHOU Minghao, ZHOU Zhengjun.Design of Injection Mould for Grip Strength Tool Handle Based on UG Secondary Development of YanXiu External Plugs[J]. Plastics, 2025, 54(4):157-161.
[29] 刘义考, 刘玉波. 基于CAD／CAE协同优化的计量器面壳注射模设计[J]. 塑料, 2025, 54(4):162-167.
[29] LIU Yikao, LIU Yubo. Design of Injection Mould for Gauges Shell Based on CAD and CAE Collaborative Optimization[J]. Plastics, 2025, 54(4):162-167.
[30] 方意琦, 伊水涌, 胡奖品,等. 冰箱扣手板哈夫滑块／旋转抽芯注射模的设计[J]. 塑料, 2025, 54(4):168-174.
[30] FANG Yiqi, YI Shuiyong, HU Jiangpin, et al. Refrigerator-Buckle-Board Injection Mould Design with the Angle-Half-Slider/Rotating Extracting Mechanism [J]. Plastics, 2025, 54(4):168-174.
发展与动态
[31] 王春雨, 王连盛, 马旭冉,等. 建筑外墙外保温材料燃烧特性及阻燃的进展[J]. 塑料, 2025, 54(4):175-181.
[31] WANG Chunyu, WANG Liansheng, MA Xuran, et al. Progress on Combustion Characteristics and Flame Retardancy of External Insulation Materials for Building Exterior Walls[J]. Plastics, 2025, 54(4):175-181.
[32] 张克平, 杨君乾, 陈东胜. 木塑复合材料磨损行为进展[J]. 塑料, 2025, 54(4):182-188.
[32] ZHANG Keping, YANG Junqian, CHEN Dongsheng. Progress on Wear Behavior of Wood-Plastic Composite[J]. Plastics, 2025, 54(4):182-188. |
