改性与合金特辑
[1] 花蕾. 不同类型、长径比碳纳米管改性PDMS柔性复合材料[J]. 塑料, 2025, 54(3):1-6，11.
[1] HUA Lei. Improved Properties of Different Aspect Ratio and Types Carbon Nanotubes Polydimethylsiloxane Based Composite[J]. Plastics, 2025, 54(3):1-6+11.
[2] 杨文龙, 张玉, 李明,等. 改性凹凸棒土对PBT纳米复合材料力学性能的影响[J]. 塑料, 2025, 54(3):7-11.
[2] YANG Wenlong, ZHANG Yu, LI Ming, et al. Effect of Modified Attapulgite on Mechanical Properties of PBT Nanocomposite[J]. Plastics, 2025, 54(3):7-11.
[3] 卢翠红, 黎胤宏, 杨小平,等. 活性CaCO3对PBS复合材料结晶行为及力学性能的影响[J]. 塑料, 2025, 54(3):12-16+22.
[3] LU Cuihong, LI Yinhong, YANG Xiaoping, et al. Effect of Activated CaCO3 on Crystallization Behavior and Mechanical Properties of PBS Composite[J]. Plastics, 2025, 54(3):12-16+22.
[4] 张濛, 单雪影, 李玲玉,等. 聚磷酸盐协同有机次膦酸铝阻燃环氧树脂[J]. 塑料, 2025, 54(3):17-22.
[4] ZHANG Meng, SHAN Xueying, LI Lingyu, et al.Polyphosphate Synergistic Organic Aluminum Hypophosphinate Flame Retardant Epoxy Resin[J]. Plastics, 2025, 54(3):17-22.
[5] 王静东, 靳耀, 李好义,等. 熔体微分静电纺PLA／PAAS滤膜的制备及性能[J]. 塑料, 2025, 54(3):23-27+32.
[5] WANG Jingdong, JIN Yao, LI Haoyi, et al. Preparation and Perpormance of Melt Differential Electrospinning PLA/PAAS Filter[J]. Plastics, 2025, 54(3):23-27+32.
[6] 王锴, 曾伟强, 吴方娟,等. 聚丙烯／氧化铝／石墨烯导热复合材料的制备及性能[J]. 塑料, 2025, 54(3):28-32.
[6] WANG Kai, ZENG Weiqiang, WU Fangjuan, et al. Preparation and Performance of Polypropylene/Alumina/Graphene Thermally Conductive Composite[J]. Plastics, 2025, 54(3):28-32.
[7] 龙仕杰, 王敦, 刘钟馨,等. 增强剂及其含量对PC／ABS复合材料性能的影响[J]. 塑料, 2025, 54(3):33-38.
[7] LONG Shijie, WANG Dun, LIU Zhongxin, et al. Effect of Reinforcement and The Content on Properties of PC/ABS Composite Materials[J]. Plastics, 2025, 54(3):33-38.
[8] 张乃文, 栗洋. ZnS-GO杂化材料改性环氧树脂摩擦学性能[J]. 塑料, 2025, 54(3):39-44.
[8] ZHANG Naiwen, LI Yang. Tribological Properties of Epoxy Resin Modified by ZnS-GO Nano-Hybrid Materials[J]. Plastics, 2025, 54(3):39-44.
[9] 周凤婵, 原野. 面向空间轴承保持架的长效自润滑材料的制备及性能[J]. 塑料, 2025, 54(3):45-50，99.
[9] ZHOU Fengchan, YUAN Ye. Long-Lasting Self-Lubricating Material Preparation and Properties for Space Bearing Cages[J]. Plastics, 2025, 54(3):45-50+99.
成型加工与理论
[10] 邱永康, 何欢, 郭斌,等. 拉伸模式下热塑性淀粉塑料的屈服行为[J]. 塑料, 2025, 54(3):51-54+66.
[10] QIU Yongkang, HE Huan, GUO Bin, et al. Yield Behavior of Thermoplastic Starch Plastic under Tensile Mode[J]. Plastics, 2025, 54(3):51-54+66.
[11] 刘洋, 李慧, 张悦. 高熔体流动速率、高抗冲聚丙烯产品性能分析及优化[J]. 塑料, 2025, 54(3):55-60.
[11] LIU Yang, LI Hui, ZHANG Yue.Analysis and Optimization of High Flow and High Impact Polypropylene Products[J]. Plastics, 2025, 54(3):55-60.
发展与动态
[12] 李仪泓, 罗岑怡, 陈伟,等. 聚乳酸固相成型自增强技术的综述与展望[J]. 塑料, 2025, 54(3):61-66.
[12] LI Yihong, LUO Cenyi, CHEN Wei, et al. Review and Prospect of Self-Reinforcement Technique of Polylactic Acid Solid Phase Molding[J]. Plastics, 2025, 54(3):61-66.
[13] 张月莉, 牛玲, 弓龙植,等. 聚乳酸阻隔性能改性的进展[J]. 塑料, 2025, 54(3):67-70，104.
[13] ZHANG Yueli, NIU Ling, GONG Longzhi, et al. Progress on Modification of the Barrier Properties in Polylactic Acid[J]. Plastics, 2025, 54(3):67-70+104.
[14] 王菊, 王文燕, 吴薇,等. 热熔胶改性技术的进展[J]. 塑料, 2025, 54(3):71-76+111.
[14] WANG Ju, WANG Wenyan, WU Wei, et al. Progress of Hot Melt Adhesive Modification Technology[J]. Plastics, 2025, 54(3):71-76+111.
[15] 尚劲, 杨卫民, 王建. 数字孪生技术在注塑成型中的应用进展[J]. 塑料, 2025, 54(3):77-83.
[15] SHANG Jin, YANG Weimin, WANG Jian. Application in Digital Twin Technology for Injection Molding[J]. Plastics, 2025, 54(3):77-83.
计算机辅助设计与数据库
[16] 王成江, 张可, 赵光辉,等. 功能化石墨烯改性聚酰亚胺热力学性能模拟[J]. 塑料, 2025, 54(3):84-91.
[16] WANG Chengjiang, ZHANG Ke, ZHAO Guanghui, et al.Thermodynamic Performance Simulation of Functionalized Graphene Modified Polyimide[J]. Plastics, 2025, 54(3):84-91.
[17] 段梦珍, 任东旭. 3D打印机喷头温度场分析及冷却系统优化[J]. 塑料, 2025, 54(3):92-99.
[17] DUAN Mengzhen, REN Dongxu. 3D Printer Nozzle Temperature Field Analysis and Cooling System Optimiza[J]. Plastics, 2025, 54(3):92-99.
[18] 万庭堂, 倪骁骅. PET保护膜模切成型过程仿真与工艺优化[J]. 塑料, 2025, 54(3):100-104.
[18] WAN Tingtang, NI Xiaohua. Simulation and Process Optimization of PET Protective Film Die-Cutting and Forming Process[J]. Plastics, 2025, 54(3):100-104.
[19] 杨安, 裘旭东, 崔学广,等. 基于CAE优化的VR座椅转轴盖弯管／差速滑块脱模机构注塑模设计[J]. 塑料, 2025, 54(3):105-111.
[19] YANG An, QIU Xudong, CUI Xueguang, et al. Design of Injection Mould for VR Seat Spindle Cover with Bent/Differential Slider Demolding Mechanism Based on CAE Optimization[J]. Plastics, 2025, 54(3):105-111.
[20] 刘巨保, 廉成林, 杨明,等. 插排面板注塑成型多目标优化[J]. 塑料, 2025, 54(3):112-119.
[20] LIU Jubao, LIAN Chenglin, YANG Ming, et al.Injection-Molded Multi-Objective Optimization for Plug Panel[J]. Plastics, 2025, 54(3):112-119.
[21] 刘怡然, 李丽君, 杜月云. 基于混合机器学习预测3D打印零件的力学性能[J]. 塑料, 2025, 54(3):120-128.
[21] LIU Yiran, LI Lijun, DU Yueyun. Prediction Mechanical Properties of 3D Printed Parts by Hybrid Machine Learning Model[J]. Plastics, 2025, 54(3):120-128.
[22] 顾泽恩, 廖秋慧, 何一博,等. 双层壁包装箱型坯吹胀数值模拟及壁厚优化[J]. 塑料, 2025, 54(3):129-134.
[22] GU Zeen, LIAO Qiuhui, HE Yibo, et al. Numerical Simulation of Blow-Up and Wall Thickness Optimization of Double-Wall Box Blanks[J]. Plastics, 2025, 54(3):129-134.
[23] 陈丽, 任小鸿, 刘惺,等. 深腔壳体注塑件翘曲变形分析及优化[J]. 塑料, 2025, 54(3):135-140+152.
[23] CHEN Li, REN Xiaohong, LIU Xing, et al. Analysis and Optimization of Warpage Deformation of Injection Molded Parts of Deep-Cavity Shell[J]. Plastics, 2025,54(3):135-140+152.
[24] 赫灵川, 石广丰, 刘辉煌. 基于Moldflow模拟注射成型与注射压缩成型对比分析[J]. 塑料, 2025, 54(3):141-146+160.
[24] HE Lingchuan, SHI Guangfeng, LIU Huihuang. Comparative Analysis of Injection Molding and Injection Compression Molding Based on Moldflow [J]. Plastics, 2025, 54(3):141-146+160.
机头与模具
[25] 胡萍, 余朝宽, 周淑容. 汽车冷却水箱盒盖热流道注射模设计[J]. 塑料, 2025, 54(3):147-152.
[25] HU Ping, YU Chaokuan, ZHOU Shurong. Design of Injection Mould with Hot Runner of Automotive Cooling Water Tank Cover[J]. Plastics, 2025, 54(3):147-152.
[26] 程越, 左桂兰. 基于CAE优化的农用喷药无人机喷管注塑模设计[J]. 塑料, 2025, 54(3):153-160.
[26] CHENG Yue, ZUO Guilan. Design of Injection Mould for Agricultural UAV Spray Pipe Based on CAE Optimization[J]. Plastics, 2025, 54(3):153-160.
合成与制备
[27] 刘雅娜, 俄胜哲, 韩国君,等. 以碱改性粉煤灰为原料制备高吸水树脂[J]. 塑料, 2025, 54(3):161-166.
[27] LIU Yana, E Shengzhe, HAN Guojun, et al. Super Absorbent Resin Prepared from Alkali Modified Fly-Ash[J]. Plastics, 2025, 54(3):161-166.
降解塑料
[28] 赖文, 何和智, 熊华威. 熔融加工制备淀粉／PVA复合材料的结构与性能[J]. 塑料, 2025, 54(3):167-172.
[28] LAI Wen, HE Hezhi, XIONG Huawei. Structure and Properties of Starch/PVA Composite Prepared by Melt Processing[J]. Plastics, 2025, 54(3):167-172.
标准与测试
[29] 陈壮, 王元凤, 杜然. 口罩熔喷聚丙烯纤维的ATR-FTIR检验及聚类分析[J]. 塑料, 2025, 54(3):173-179.
[29] CHEN Zhuang, WANG Yuanfeng, DU Ran. ATR-FTIR Examining and Clustering Analysis of Masks Melt-Blown Polypropylene Fibers[J]. Plastics, 2025, 54(3):173-179.
[30] 徐亮, 严莎, 孙鑫,等. 邻苯二甲酸酯检测方法的进展和标准现状[J]. 塑料, 2025, 54(3):180-188.
[30] XU Liang, YAN Sha, SUN Xin, et al. Progress in Detection Methods of Phthalic Acid Esters and Current Status of Standards[J]. Plastics, 2025, 54(3):180-188.
|
